RS PRO Plier Crimping Tool for Insulated Terminals

  • RS Stock No. 125-1964
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS PRO Crimping Tool for Insulated Terminals

RS PRO hand crimping tool for crimping insulated terminals onto wire. This ratchet hand tool has 3 crimping cavities; 1.25mm2 (22-16 AWG), 2mm2 (16-14 AWG) and 5.5mm2 (12-10 AWG). This RS Pro crimp tool has been designed for professional use with the highest attention to details.

Features and Benefits:
Overall height 10.5 inch
Handle length: 7 inch
Compact and lightweight tool for professional use
Material: hardened steel frame with plastic grips
Ratchet release
Wire size range: 0.5 to 6.0 mm²

Typical Applications
Crimping tools can be used for a variety of applications:-
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How to maintain the product?
• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to dirt or other contaminants

*Use a light mineral-free oil

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Crimp Connector Type Insulated Terminals
Crimp Tool Type Plier
61 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 87.07
(exc. GST)
$ 95.78
(inc. GST)
units
Per unit
1 +
$87.07
Related Products
Bootlace Ferrule Strips Ferrules available in the French ...
Description:
Bootlace Ferrule Strips Ferrules available in the French colour code range in sizes 0·5 to 2·5mm²,Each pack of ferrules contain 10 strips of 50, which can be rapidly terminated with a special tool, with automatic feed action enables cables to ...
RS Insulated Crimping Tool All RS crimp tools ...
Description:
RS Insulated Crimping Tool All RS crimp tools are compatible with the RS range of red, yellow, and blue terminals Range Compatibility/Tooling Detail Tool will also cut and strip wire, cut small diameter bolts and crimp ignition terminals Note Unsuitable ...
RS PRO Ratchet Crimping Tool for Crimp Terminal, ...
Description:
RS PRO Ratchet Crimping Tool for Crimp Terminal, 38AWG to 18AWG This RS PRO crimp tool has a locator on the tool positions contacts in the tool jaws to give an easy consistent crimp action A contact extraction tool is ...
Connectors for signal circuit or power supply circuit, ...
Description:
Connectors for signal circuit or power supply circuit, applicable to the factory automation, heavy electric machinery, and other industrial equipment in general Double spring construction Housing Lances Clear click feeling With secure locking device High electric current capacity High withstanding ...