RS PRO Plier Crimping Tool for Bootlace Ferrule

  • RS Stock No. 779-554
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

RS Hand Crimp Plier Tool for Bootlace Ferrules

RS hand crimp plier tool for crimping bootlace ferrules with a wire size range of 0.5 to 16mm2. The crimping indents of this bootlace ferrule hand crimp plier tool are clearly marked with the different wire size ranges.

Features and Benefits

• Supports a wire size of 0.5 to 16 mm²
• Suitable for crimping bootlace ferrules
• Ensures integrity the connector termination
• The indents are clearly marked with the different wire size ranges

Typical Applications

• Maintenance & repair
• Electrical Installations
• Computer Interfacing
• Cable assemblies

FAQ:
How easy are they to use?

They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.

How do you maintain the product?

• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Crimp Connector Type Bootlace Ferrule
Crimp Tool Type Plier
14 : Next working day (AU stock)
85 : 5 working days (Global stock)
Price (ex. GST) Each
$ 45.69
(exc. GST)
$ 50.26
(inc. GST)
units
Per unit
1 +
$45.69
Related Products
A non-ratchet, cam-action crimping tool with hexagon die ...
Description:
A non-ratchet, cam-action crimping tool with hexagon die set to crimp F series connectors,To assemble just prepare cable termination with stripping tool (stock no 433-270) and cassette (stock no 457-327) and fold the braid back,Fit the cable fully into the ...
The 533-279 is an “Original line” hand crimp ...
Description:
The 533-279 is an “Original line” hand crimp tool for insulated terminals in the range from 6.0 mm² to 0.75 mm²/AWG 22 to AWG10. The tool is designed to provide consistent and reliable crimp connections on end splices/ferrules wires.Also known ...
K 30/4 K self-setting crimping tool for cable ...
Description:
K 30/4 K self-setting crimping tool for cable end-sleeves and twin cable end-sleeves 0.08 - 16 mm². Square crimpingCharacteristicsOne crimping profile for cross-sections from 0.08-16 mm² due to automatic cross-section adjustmentWith ratchet for consistently-controlled crimp resultsLateral insertion (side ...
CK's high quality ratchet crimping tool is suitable ...
Description:
CK's high quality ratchet crimping tool is suitable for bare terminals and open cups. Safe and precise, it enables crimping for a variety of electrical or mechanical applications. Made from carbon alloy steel, this ratchet crimping tool is light-weight and ...