RS PRO Crimp Die Set, Terminal, Wire size 0.25 → 6 mm²

  • RS Stock No. 848-408
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

RS Universal Crimp Frame

All RS crimp tools are compatible with the RS range of red, yellow, and blue terminals.

Features and Benefits

• Load setting
• Heat treated frame components
• Black oxide finish
• Full cycle ratchet controlled release
• Red molded textured plastic grip

Range Compatibility/Tooling Detail

• Connector Type: Terminal
• Minimum Wire Size: 0.25 mm²
• Maximum Wire Size: 6 mm²

Compatible Die Set

Die set for red, yellow, and blue terminals

Note: All RS crimp tools are compatible with the RS range of red, yellow, and blue terminals.

Typical Applications:

• Maintenance and repair
• Electrical Installations
• Marine applications
• Cable assemblies

FAQ:
How easy are they to use?

They are very easy to use with either hand, there is no formal training required for this crimper.

How do you maintain the product?

• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Note

Unsuitable for un-insulated terminals, or mini yellow size.

Specifications
Attribute Value
Crimp Connector Type Terminal
Minimum Wire Size mm² 0.25mm²
Wire Size 0.25 → 6 mm²
Maximum Wire Size mm² 6 mm²
Terminal Insulation Insulated
Port Colour Blue, Red, Yellow
74 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 52.02
(exc. GST)
$ 57.22
(inc. GST)
units
Per unit
1 - 4
$52.02
5 - 24
$50.72
25 - 74
$48.23
75 - 149
$46.81
150 +
$45.65
Related Products
Crimp die set for system tool KNIPEX 97 ...
Description:
Crimp die set for system tool KNIPEX 97 43 200 (stock no: 336-8084)For crimping uninsulated butt splices For processing braids of 2.5 → 10.0 mm² (AWG 13 → 7)Dies are bronzed and labelled with the cable cross-section Dies are fixed ...
Professional hand crimp tool frame made from hardened ...
Description:
Professional hand crimp tool frame made from hardened steel for crimping modular RJ plugs onto conductors using interchangeable die sets This RJ modular plug hand crimp tool features a full cycle ratcheting mechanism that prevents the handles from opening until ...
A universal crimp tool frame with die sets ...
Description:
A universal crimp tool frame with die sets available separately for terminating AMP and Western Electric Style data plugsTool frame: (stock number 443-895) A ratchet action crimp tool frame with ratchet release and finger operated set screws for rapid location ...
A multi-purpose steel frame crimping tool for terminating ...
Description:
A multi-purpose steel frame crimping tool for terminating AMP and Western Electric Style data plugs in all the popular configurations Employing a parallel action jaw closure, the tool will accept any one of the die sets using a very simple ...