Huco Universal/Lateral Offset Coupling 206.34.3131

  • RS Stock No. 748-386
  • Mfr. Part No. 206.34.3131
  • Manufacturer Huco
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Uni-Lat® Couplings

Uni-Lat lateral displacement couplers uniquely combine the mechanisms of the universal joint and the Oldham type coupling to compensate for simultaneous parallel and angular shaft offsets. Parallel misalignment is accommodated by lateral displacement, therefore Uni-Lats can handle severe alignment errors. This is a valuable feature in densely packaged and blind assemblies where alignment is difficult to verify or rectify. While severe misalignment can accelerate the erosion of bearing pre-load, it will not precipitate catastrophic failure.,Suitable for connecting to light servo and stepper drives, encoders, resolvers, tachogenerators, and to instrumentation applications generally.

Accommodates considerable misalignment
Low inertia
Non-magnetic
Electrically isolating
Corrosion resistant
Torsional damping
Zero backlash
May be used with RS bore reducers

//media.rs-online.com/t_line/L748033-01.gif
//media.rs-online.com/t_line/L748320-01.gif
//media.rs-online.com/t_line/L748320-02.gif
Specifications
Attribute Value
Bore 3/8in
Torque Rating 2.5Nm
Misalignment - Angular
Misalignment - Parallel 0.25mm
On back order for despatch 27/08/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 48.48
(exc. GST)
$ 53.33
(inc. GST)
units
Per unit
1 - 5
$48.48
6 - 11
$47.69
12 +
$46.96
Related Products
Oldham Style Couplings - Set Screw Style Backlash-free ...
Description:
Oldham Style Couplings - Set Screw Style Backlash-free Can handle large radial shaft misalignment Constant low bearing side loads Electrically isolating.
Oldham Style Couplings - Clamp Style Clamp style ...
Description:
Oldham Style Couplings - Clamp Style Clamp style couplings for use with heavy power transmission at moderate speeds Clamp style couplings for use with heavy power transmission at moderate speeds. Backlash-free Can handle large radial shaft misalignment Constant low bearing ...
Miniature Acetal Fork Universal Joint A comprehensive range ...
Description:
Miniature Acetal Fork Universal Joint A comprehensive range of light duty universal joints manufactured in non-ferrous metals and Acetal, with a -40 to 85°C operating range Corrosion resistant construction Freedom from backlash No lubrication required Electrical isolation between shafts Available ...
Single Universal Joint with Plain Bearing Universal joints ...
Description:
Single Universal Joint with Plain Bearing Universal joints for connecting a wide range of equipment where there is a misalignment greater than 5° Suitable for connecting line shafts, drive shafts, conveyors and most types of rotating machinery to a prime ...