Hengstler 6 Digit, LED, Digital Counter, 5kHz, 115 V ac

  • RS Stock No. 200-1140
  • Mfr. Part No. 0 732 067
  • Manufacturer Hengstler
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Dual Preset - Counter/tachometer/timer

Multifunction units housed in a panel mounting case (DIN 43700)
Prescaler option - multiplier programmable from 0.001 to 9.999 (counter and tachometer modes)
The unit may be set in any of three modes: Counter Mode; Tachometer Mode; Time Meter Mode
Counter mode: can be programmed for quadrature, differential, count/direction
Tachometer mode: incoming pulses are counter per gate time, which can be pre-selected. Over speed or under speed can also be indicated
Time meter mode: programmable time ranges and decimal point
45 x 45mm panel cutout

Hengstler Panel Mounting 48 x 48

Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.

Specifications
Attribute Value
Supply Voltage 115 V ac
Count Mode Hours
Display Type LED
Input Type Voltage
Connection Type Screw
Reset Method Automatic, Manual
Number of Digits 6
Mounting Type Panel Mount
Output / Interface Relay, Transistor
Digit Height 7.6 mm
Maximum Count Frequency 5kHz
Display Range -99999 → 999999
Minimum Operating Temperature 0°C
Series TICO 732
Measurement Range -99999 → 999999
Maximum Operating Temperature +50°C
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 481.25
(exc. GST)
$ 529.37
(inc. GST)
units
Per unit
1 - 4
$481.25
5 - 9
$457.18
10 +
$433.11
Related Products
5 counting functions (multi-functional)Freely definable scaling factorTwo-colour display ...
Description:
5 counting functions (multi-functional)Freely definable scaling factorTwo-colour display of actual and set value (red & orange)Backlit LCD displayEasy preset using rocker switches.
Rear connection via shrouded push-on terminals (supplied with ...
Description:
Rear connection via shrouded push-on terminals (supplied with 0.8 x 2.8mm receptacles).
Used for counting electrical impulses up to a ...
Description:
Used for counting electrical impulses up to a pre-set value which is continuously displayed below the count value, enabling comparisons to be madeIsolated SPDT micro switch changes over when the counter reaches the preselected count value. Change over contact rated ...
Designed for sequential measurementsPulse variation can be programmed ...
Description:
Designed for sequential measurementsPulse variation can be programmed from 0.0001 to 9999.99Sensor logic can be programmedFrequencies processed up to 40 kHzMeasurement according to measurement of length of periodResettable LED display.