Schneider Electric Tesys D LC1D 3 Pole Contactor, NO/NC, 38 A, 18.5 kW, 24 V dc Coil

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Schneider Electric LC1D TeSys D Contactors

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What accessories are available?

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Is the TeSys D range a double break pole type contactor?

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

Schneider Electric LC1D38BL Contactor

The Schneider Electric LC1D38BL model is a 3 pole contactor featuring a 24 V dc operating coil, with an AC-3 full load current rating of 38 A.

Attribute Value
Coil Voltage 24 V dc
Number of Poles 3
Contact Current Rating 38 A
Power Rating 18.5 kW
Range TeSys D
Series LC1D
Normal State Configuration NO/NC
Contact Voltage Rating 600 V ac
Number Of Auxiliary Contacts 2
Terminal Type Screw
Width 45mm
Length 85mm
Depth 92mm
11 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 632.25
(exc. GST)
$ 695.47
(inc. GST)
Per unit
1 - 2
3 - 4
5 +
Related Products
Semiconductor contactor Semiconductor contactors for wear-free, silent switching ...
Semiconductor contactor Semiconductor contactors for wear-free, silent switching of AC loads such as heating, motors, valves and lighting The cost of investing in this new technology is quickly recovered where high switching rates are used Zero-voltage switching to prevent feedback ...
A Series AC Controlled Contactors Three main poles ...
A Series AC Controlled Contactors Three main poles One N/O auxiliary contact Front and side mounted auxiliary contact blocks Location for surge protectionDIN rail and back plate mounting Manufactured to IEC947-4-1, EN60 047-4-1CE marked Note For Overloads see 455-7797, 456-0196 ...
3 Pole Contactors with Screw Clamp or Solder ...
3 Pole Contactors with Screw Clamp or Solder Termination Contactors have a switching voltage of 440Vac and a coil consumption (ac coils 50 / 60Hz rated) of 45VA (Hold in) and 30VA (inrush). Utilisation category AC3DIN rail or screw mounting ...
Contactors – 3RT2 Range The 3RT2 contactors are ...
Contactors – 3RT2 Range The 3RT2 contactors are climate-proof and are suitable and tested for use worldwide, sizes S00 to S2, up to 37 kW Size S00, up to 75 kWSize S0, up to 18.5 kWSize S2, up to 37 ...