Schneider Electric CAD Series Contactor, 10 A, 2NO + 2NC, 690 V ac

Featuring a new design, the TeSys D series of contactors are simple and fast to set up in all automation applications. Compliant with international standards these relays maintain a compact size of 45 to 55mm (40 to 65A). Assuring a permanent tightening quality even in the event of conductor creep, all versions are equipped with EverLink which is a new patented technology. Each relay is also as standard 10A with 5 poles, suitable for AC or DC control. A version is also available with low consumption and built in suppression.

What is EverLink technology?
A removable terminal block, contactors and circuit-breakers can be linked without and accessory, vertically. On the same rail wiring can be connected in less than a minute. Reducing heat loss at connection points and without creep this technology provides quality wiring, continuity of service, fast assembly and reduced dimensions.

ac or dc operating coils
Built-in coil suppression on dc versions only
Switching category d2

• BS 4794, EN 60947-5, IEC 60947-5-1, NF C 63-140 and VDE 0660 standards
• CSA and UL certification
• IP2x protection front face conforming to VDE 0106
• TH conforming to IEC 60068

Applications - Used to create motor starters for any type of application and integration in control systems. Other applications include:
• Switching contactor or relay coils
• Powering control and signalling equipment
• Simple control systems
• Industry, infrastructure, and building

For typical auxiliary contact blocks see stock number 394-9970

Take a load off and leave the switching of your control circuit to this Schneider Electric contactor. You can put it to work in systems with a rated operational voltage of up to 690V AC, so it's a suitable option for industrial motor control. As the dependable device withstands powerful 6kV voltage spikes, there's minimal risk of damage to components as a result of electrical surges. Screw clamp terminals make for uncomplicated wiring using only a standard screwdriver. As the wired connections withstand vibration and shock, you can conveniently use this contactor in harsh environments and mobile applications.

• Mechanical durability of up to 30 million cycles for reliability throughout its extended service life
• Insulated to protect against electric shocks
• Compact dimensions of 77 (H) x 45 (W) x 84mm (D) to maximise panel packing efficiency

• Lighting systems
• Cooling lines
• Power generation plants
• Automotive manufacturing

Yes, for quick and easy assembly, you can clip this device onto a 35mm DIN rail. Alternatively, you can screw-fix it to a plate.