Schneider Electric Contactor Interface Module for use with LC1 Series

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Amplifier Interface Module

Modules for directly switching a contactor from a low level signal from a PLC output, (Current rating <2mA)
Mounts directly onto the contactor or relay coil terminals. Also provides electrical isolation (solid state device only)
Compatible with new TeSys contactors up to 80kW; 4 - 18.5kW units require coil adaptor stock no. 400-2038

  state ’O’ state ’I’
solid state <2.4V 5-30V
relay <2.4V 1≥17V

Schneider Electric d2 Range Accessories

Specifications
Attribute Value
Accessory Type Interface Module
For Use With LC1 Series
Series LA4D
32 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 72.70
(exc. GST)
$ 79.97
(inc. GST)
units
Per unit
1 - 2
$72.70
3 - 4
$63.62
5 +
$57.26
Related Products
For direct mounting beneath the 1, 3 or ...
Description:
For direct mounting beneath the 1, 3 or 4 pole F range contactors Class 10 current rating (conforming to EN 60947-4-1)For suitable contactors see stock no's 827-142, 827-164 & 827-158 typically.
Suppresses transient voltages in coilsMounts directly onto contactor ...
Description:
Suppresses transient voltages in coilsMounts directly onto contactor and control relay fronts even if auxiliary contact block is fittedIncorporates an LED which will light up when the coil is energised.
Modules clip onto the front section of LC1K ...
Description:
Modules clip onto the front section of LC1K and LP1K contactors.Modules fitted with foolproofing devices.Tool-free connection.
On coil energisation the mechanical latch is engaged, ...
Description:
On coil energisation the mechanical latch is engaged, holding the armature closedA de-latch coil, available in 110V or 240V control voltages, will release the mechanism remotely or a button, on the front permits manual releaseElectrical delatching should be by a ...