FlexLink Beam Connecting Strip, strut profile 22 mm, 44 mm, Groove Size 5.5mm

  • RS Stock No. 308-0217
  • Mfr. Part No. XDFC 9X40
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Straight Connecting Strip XC and XD

For connecting beam ends to end.,Suitable for moment loads but for pulling loads use a yoke,Stock-no. 261-2166 (4 hole) and stock-no. 308-0217 (2 hole) include grub screws.,Stock-no. 331-4093 has two M8 holes

//media.rs-online.com/t_line/L261216-01.gif
//media.rs-online.com/t_line/L2612166-01.gif
//media.rs-online.com/t_line/LD261216-02.gif
//media.rs-online.com/t_line/LF261216-10.gif
Specifications
Attribute Value
Structural Element Type Beam
Connector Type Strip Connector
Fits Groove Size 5.5mm
Thread Size M6
Fits Strut Profile 22 mm, 44 mm
Product Family FlexLink
Material Steel
Product System XD
15 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 4.67
(exc. GST)
$ 5.14
(inc. GST)
units
Per unit
1 - 5
$4.67
6 - 24
$4.58
25 +
$4.50
Related Products
Suitable for simple door functions, The T-slot rotatable ...
Description:
Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface. Hole centres 50mm,Fasteners not included. Each hinge requires:. Qty 2 M6´12 socket screws see stock no. ...
Slot nuts can be inserted directly into the ...
Description:
Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ...
For building stable and neat framework corners.The beams ...
Description:
For building stable and neat framework corners.The beams must be cut accurately (45° for a 90°corner, and 22.5° for a 45° corner).Corner fittings can be placed into the T-slots and clamped against the slot with the set screws provided.