FlexLink Beam Joint Clamp, strut profile 44 mm, 88 mm, Groove Size 11mm

  • RS Stock No. 261-2447
  • Mfr. Part No. XCFJ 75 E
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Rotary Joint XC

The FlexLink Rotary Joint XC allows two XC structural beams to be attached to each other, allowing one of the beams to swing. The joint is intended for use in pairs, to avoid movement loads. The joint should be fastened into the T-slot of each beam with 2 slot nuts (RS stock-no. 248-9859) and M8x14 DIN7984 socket head screws (note: M8x14 DIN 7984 screws are not supplied and not currently available separately from RS). The maximum load for a pair of joints is 1000N.

//media.rs-online.com/t_line/L261244-01.gif
//media.rs-online.com/t_line/LF261244-10.gif
Specifications
Attribute Value
Structural Element Type Beam
Connector Type Joint
Fits Groove Size 11mm
Thread Size M6
Fits Strut Profile 44 mm, 88 mm
Product Family FlexLink
Material Aluminium
Product System XC
3 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 71.93
(exc. GST)
$ 79.12
(inc. GST)
units
Per unit
1 - 5
$71.93
6 - 11
$70.12
12 +
$68.63
Related Products
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ...
Suitable for simple door functions, The T-slot rotatable ...
Description:
Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface. Hole centres 50mm,Fasteners not included. Each hinge requires:. Qty 2 M6´12 socket screws see stock no. ...
Multi-blocks are a versatile connector for fastening sheet ...
Description:
Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A square nut is included, XC and XF M6, XD M5 for mounting ...
Slot nuts can be inserted directly into the ...
Description:
Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.