RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

RS PRO Stainless Steel Compression Spring, 44.5mm x 5.5mm, 0.23N/mm


560 : Next working day (AU stock)
60 : 7 working days (Global stock)
Add to Basket

Price (ex. GST) Each (In a Pack of 10)

$1.559

(exc. GST)

$1.715

(inc. GST)

units

Added

RS Stock No.:
821-346
Manufacturer:
RS PRO
COO (Country of Origin):
GB
unitsPer unitPer Pack*
10 - 40$1.559$15.59
50 - 90$1.527$15.27
100 - 390$1.467$14.67
400 +$1.402$14.02
*price indicative

Stainless Steel Compression Springs


RS PRO range of compression springs manufactured from stainless steel which come in various sizes and lengths and with a closed not ground end type. Compression springs are very popular as they can store a large amount of energy in a small space making them ideal for a great range of uses.

These RS PRO compression springs also referred to as coil springs have varying degrees of stiffness which is also known as spring rate.

Coiled springs are designed so they can push back to the springs original height when they are compressed. These springs are used to keep components from meeting.

RS PRO have a great range of compression springs with wire diameters from 0.2 mm to 2.2 mm and spring rates from 0.06 N/mm to 22.56 N/mm.


Features and Benefits:


Material to DIN 17224 No.1, 4310 or BS2056 EN58A
Ends are squared and unground
Appearance: brown/bronze
Made with a right hand helix


Typical Applications:


Compression springs are a very popular spring and can be used in a number of different industries. This type of spring can be used in
Ball point pens
Vehicles
Mobile phones
Valves
Electrical switches


Why RS PRO?
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality, which means you can be confident too.


Note

The load at minimum working length is the load required to compress the spring to that length. All dimensions and forces to conform to DIN 2095 (grade 2).

Standards

DIN 17224 No.1, 4310 or BS2056 EN58A

AttributeValue
Outside Diameter5.5mm
Wire Diameter0.5mm
Free Length44.5mm
Minimum Working Length15.1mm
Load at Minimum Working Length6.7N
MaterialStainless Steel
Spring Rate0.23N/mm
EndsClosed (Square)/Unground