RS PRO Component & IC Tester, Resistance Measurement Resolution 100mΩ, Capacitance Measurement Resolution 0.1pF

  • RS Stock No. 123-3221
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS PRO ICT 76 Component Tester

From RS PRO comes a low cost, battery powered component tester with a 3 digit LCD display and a maximum reading of 1999. The RS PRO ICT 76 measures a number of electrical parameters which include resistance, capacitance, diode and others making it ideal for use in field service and production environments.

Features and Benefits

  • Measures resistance and capacitance up to 20mF

  • Transistor hFE measurement

  • Transistor leakage current measurement

  • SCRs/thyristors test

  • Diode Test

  • LED test

  • Silicon controlled rectifier test - good/bad test result

  • Battery test

  • 2000 count digital display

  • Low battery indication and overload protection

  • Dimensions: 175 mm x 84 mm x 31 mm

  • Tilt stand for easier reading

  • Weight (including battery) 340 g without holster, 550 g with holster

Typical Applications

Component & IC Testers are devices used to test ICs (Integrated Circuits) and SMD (Service Mounting Devices) and measure a range of electrical parameters such as voltage, resistance, capacitance, diode, continuity and more. Component & IC testing devices are available in a range of devices, many of which are portable hand held devices. These testers are commonly used in applications such as:

  • Production

  • Trouble shooting

  • Maintenance

FAQs

Does this require batteries?
RS PRO ICT 76 is powered by 9 V alkaline battery.

Supplied with

ICT76 component tester, set of test leads (1 x black & 1 x red), operating manual and protective holster

Specifications
Attribute Value
Resistance Measurement Resolution 100mΩ
Capacitance Measurement Resolution 0.1pF
Tester Type Component, IC
Display Type LCD
Battery Life 200 h
Battery Type Alkaline
Power Source Battery
Dimensions 84 x 31 x 175mm
Weight 330 (with Battery)g
Height 175mm
Length 84mm
Maximum Capacitance Measurement 20mF
Maximum Operating Temperature +50°C
Maximum Resistance Measurement 20 MΩ
Minimum Capacitance Measurement 20pF
Minimum Operating Temperature 0°C
Model Number p ICT76
Width 31mm
Minimum Resistance Measurement 200Ω
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
Was $145.52
$ 143.37
(exc. GST)
$ 157.71
(inc. GST)
units
Per unit
1 +
$143.37
Related Products
Ideal-tek Smart Tweezers LED Tester ST-LED Ideal-tek ST-LED ...
Description:
Ideal-tek Smart Tweezers LED Tester ST-LED Ideal-tek ST-LED is a specialised solution for testing and verifying SMD and through-hole LEDs Its design combines a pair of high quality gold-plated tweezers and a digital adaptive LED tester in a compact, lightweight, ...
Thyristor and Triac Analyser The Atlas SCR will ...
Description:
Thyristor and Triac Analyser The Atlas SCR will identify the device type, display the pinout and measure gate sensitivity Connect any way round Thyristor and Triac identification Automatic pinout identification Gate sensitivity checking from 100uA to 90mALoad current test up ...
Wristband/Heel Grounder Test Station Essential for all electronic ...
Description:
Wristband/Heel Grounder Test Station Essential for all electronic assembly areas Ideal for multi operator use Requires a PP3 battery Standards Supports ESD S2020 and EN 61340-5-1 ESD control programme compliance Supplied with RS 733-996 is with a wall plate. Essential ...
Ionization Test Kit Use for periodic verification of ...
Description:
Ionization Test Kit Use for periodic verification of ionizers per ANSI/ESD SP33 and ESD TR53Measure offset voltage (balance) and discharge times Charger applies ± polarity charge to conductive plate Economical option when the Charged Plate Analyzer is not required Standards ...