RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.

FTDI Chip Breakout Module - UMFT230XB-01

This image is representative of the product range

30 In stock for delivery within 7 working day(s)
Add to Basket

Price (ex. GST) Each


(exc. GST)


(inc. GST)



RS Stock No.:
Mfr. Part No.:
COO (Country of Origin):
unitsPer unit
1 +$17.07

USB to I²C/UART/FT1248 Breakout Modules, FTDI Chip

Versions Available
(757-0054) UMFT201XB-01 - FT201XQ Breakout Board
(757-0067) UMFT230XB-01 - FT230XQ Breakout Board

This range of FTDI breakout boards are designed to convert USB to serial or parallel interfaces. The UMFT201XB-01 (757-0054) bridges USB to I²C and the UMFT230XB-01 (757-0067) bridges from USB to a UART IC.

The UMFT201XB bridges from USB to I²C two-wire serial bus interface
The UMFT220XB bridges from USB to Parallel 4-Bit FT1248 Interface
The UMFT230XB bridges from USB to Basic UART (Universal Asynchronous Receiver/Transmitter)
The breakout board converts USB 2.0 Full-Speed to a serial interface
Serial signals on a 2.54mm (0.1”) pitch 10-pin female connector
The module plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connector
The serial interface operate at +3.3V
Input/Output pins are 5V tolerant

ClassificationBreakout Module
TechnologyUSB2.0 to Full Speed I2C with Four Control Bus Line
Kit ClassificationBreakout Module