FTDI Chip, VNC2 Vinculum Module USB Controller Development Kit, V2DIP2-32

  • RS Stock No. 708-0094
  • Mfr. Part No. V2DIP2-32
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Vinculum VNC2 Development Modules

The VNC2 is the second of FTDI’s Vinculum family of Embedded dual USB host controller devices. The VNC2 device provides USB Host interfacing capability for a variety of different USB device classes including support for BOMS (bulk only mass storage), Printer, HID (human interface devices). For mass storage devices such as USB Flash drives, VNC2 also transparently handles the FAT file structure. Communication with non USB devices such as a low cost microcontroller is accomplished via either UART, SPI or parallel FIFO interfaces. The VNC2 provides a new cost effective solution for providing USB Host capability into products that previously did not have the hardware resources available. The VNC2 supports the capability to enable customers to develop custom firmware using the Vinculum II development software tool suite. The development tools support compiler, linker and debugger tools complete within an integrated development environment (IDE). The Vinculum-II VNC2 family of devices are available in 32-lead LQFP, 32-lead QFN, 48-lead LQFP, 48-lead QFN, 64-Lead lQFP and 64-lead QFN packages.

USB ’A’ type USB socket to interface with USB peripheral devices
Second USB interface port accessible via module pins if required
UART, parallel FIFO and SPI interfaces can be programmed to a choice of available I/O pins
Single +5V supply input from DIL connectors or +5V supplied via USB VBUS slave interface or debugger module
Auxiliary +3.3V @ 200mA power output to external logic
Debugger interface pin available on DIL pins or via 6 way male header which interfaces to separate debugger module
Firmware upgrades via UART or debugger interface pin header

Note

Software downloaded from www.ftdichip.com/Firware/VNC2tools.htm"

Specifications
Attribute Value
Kit Classification Development Kit
Kit Name VNC2 Vinculum Module
On back order for despatch 30/03/2021, delivery within 7 working days from despatch date.
Price (ex. GST) Each
$ 42.01
(exc. GST)
$ 46.21
(inc. GST)
units
Per unit
1 - 1
$42.01
2 - 4
$40.88
5 - 9
$39.39
10 - 19
$38.04
20 +
$36.83
Related Products
CSTCR No adjustment necessary for oscillation circuits Integral ...
Description:
CSTCR No adjustment necessary for oscillation circuits Integral load capacitors Wide selection of frequencies available The CSTCR series of MHz band ceramic resonators from Murata are part of the CERALOCK® range CERALOCK® ceramic resonators are constructed from high stability piezoelectric ...
The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated ...
Description:
The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated by a standard 35mm Audio Jack (AJ) connector. The difference between the two cables is that the TTL-234X-5V-AJ operates at +5V levels and the TTL-234X-3V3-AJ operates at +3.3V levels. On these cables ...
Vinco Development Module The Vinculo is a dual ...
Description:
Vinco Development Module The Vinculo is a dual channel USB Host/Device Controller is targeted at rapid development and prototyping of USB Host/Device interfaces An optional Vinculo prototyping board provides add-on expansion board support. The Vinculo features an 8-channel, 10Bit ADC, ...
USB 20 Hi-Speed Mini-Module, FTDI Chip The FT2232H ...
Description:
USB 20 Hi-Speed Mini-Module, FTDI Chip The FT2232H Mini-Module is a USB-to-Serial/FIFO unit that utilizes the FT2232H USB Hi-Speed 2-port bridge chip The FT4232H Mini-Module is a USB-to-Serial/MPSSE unit that utilizes the FT4232H USB Hi-Speed 4-port bridge chip The IC ...