FTDI Chip USB to RS422 Interface Board - USB-RS422-PCBA

  • RS Stock No. 687-7840
  • Mfr. Part No. USB-RS422-PCBA
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

FTDI Chip Interface Board

The FTDI Chip interface board is a USB to RS422 level serial UART converter PCB incorporating FTDI’s FT232RQ USB to serial UART interface IC device, which handles all the USB signalling and protocols. The PCB provides a fast and simple way to connect devices with an RS422 interface to a USB. Each module contains a small internal electronic circuit board, utilising the FT232R plus a USB Type-A connector. The board requires USB drivers which are used to make the FT232R on the PCB appear as a virtual COM port (VCP). This then allows the user to communicate with the USB interface via a standard PC serial emulation port.
These converters are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.
Versions Available:
(687-7825) - USB to RS232 UART Serial Converter
(687-7840) - USB to RS422 UART Serial Converter
(687-7837) - USB to RS485 UART Serial Converter

Features and Benefits

Serial UART interface
Entire USB protocol handled by the electronics on the PCB
EIA/TIA-422 interface with low power requirements
Data transfer rates from 300 baud up to 3Mbaud
Internal EEPROM with user writeable area
PCB is USB powered, no external supply required
Low USB bandwidth consumption
UHCI/OHCI/EHCI host controller compatible.USB 2.0 full speed compatible
Operating temperature range -40°C and 85°C

Applications

USB to serial RS422 level converter
Upgrading legacy peripherals to USB
Interface microcontroller UART or I/O to USB
Interface FPGA/PLD to USB
USB instrumentation PC interface
USB industrial control
USB password protected file transfer

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
CE
FCC certified

Specifications
Attribute Value
Kit Classification Development Kit
374 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 45.43
(exc. GST)
$ 49.97
(inc. GST)
units
Per unit
1 - 9
$45.43
10 - 49
$44.80
50 - 99
$43.91
100 - 249
$43.60
250 +
$43.28
Related Products
FTDI click mikroBUS™ FTDI click is a mikroBUS ...
Description:
FTDI click mikroBUS™ FTDI click is a mikroBUS add-on board for USB 20 to UART or I²C bus or SPI bus two serial interface converters. The featured integrated circuit is FT2232H, a dual high-speed USB 2.0 to UART (Universal Asynchronous ...
The LC231X module provides a low cost USB ...
Description:
The LC231X module provides a low cost USB to UART bridge using the FT231X IC to transfer data at up to 3M Baud Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
USB to Serial Full-Handshake UART Development DIP Module, ...
Description:
USB to Serial Full-Handshake UART Development DIP Module, FTDI Chip The UMFT231XA is a development module that converts USB to Serial Full-Handshake UART (Universal Asynchronous Receiver/Transmitter) interface Small PCB assembly module designed to fit a standard 762mm (0.3”) wide 20-pin ...
USB to 8-Bit 245 FIFO Development DIP Module, ...
Description:
USB to 8-Bit 245 FIFO Development DIP Module, FTDI Chip The UMFT240XA is a development module that converts USB to serial 8-Bit 245 FIFO data interface Asynchronous and Synchronous bit bang interface modes are available Small PCB assembly module designed ...