ISP2ZIF, Chip Programming Adapter for AVR Series, PIC

  • RS Stock No. 772-3088
  • Mfr. Part No. ISP2ZIF
  • Manufacturer Seeit
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

ISP2ZIF, Universal adapter SPI to ZIF40 socket for Programming Microcontrollers

The ISP2ZIF is an adapter for programming of all types of devices with In-Circuit Serial Programming / In-System Programming (ICSP/ISP), especially with the PRESTO programmer. The adapter is provided with the 40-pin Zero Insertion Force socket (ZIF) which accepts 300mil to 600mil wide devices. ISP2ZIF works well for most of programmable devices like Microchip PIC® and Atmel AVR® and AT89S ('51 architecture) microcontrollers in DIP packages up to 40-pins. The user can connect any device pin to any of 7 programming signals (VPP/13V, VDD, GND, DATA/MOSI, CLOCK, MISO, LVP).


Typical usage example:
The user connects the ISP2ZIF to the PRESTO using an ICSP cable supplied with the programmer.
The microcontroller device to be programmed smoothly fits into the ZIF socket.
The user then connects programming signals to corresponding pins of the device by plugging jumpers to appropriate positions in the pin array.
It is also possible to use the ISP2ZIF as a prototyping board.

Programming Adaptors

Attribute Value
Accessory Type Socket Adapter
For Use With AVR Series, PIC
On back order for despatch 28/11/2019, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 128.29
(exc. GST)
$ 141.12
(inc. GST)
Per unit
1 - 9
10 +
Related Products
This board acts as an adaptor to allow the programming of PIC10F2xx microcontrollers. Connects to MPLAB 2 ICDConnects to PICkit™ 1 Flash Starter KitConnects to PICSTART Plus ProgrammerConnects to BFMP Baseline Flash Microcontroller ProgrammerNo additional active or passive components required. ...
In-Circuit Debugger (ICD 2) allows the debugging of ...
In-Circuit Debugger (ICD 2) allows the debugging of a range of PIC microcontrollers through the MPLAB® Integrated Development Environment (IDE). The ICD 2 module connects between the PC and the user's target board allowing direct in-circuit debugging of the target ...
From DISCERA, the Timeflash chip programming adaptor is ...
From DISCERA, the Timeflash chip programming adaptor is a simple Windows-based USB kit that allows you to custom program and verify any DSC8XXX programmable oscillator for any frequency with up to four decimal point resolution. CMOS, LVPECL, LVDS, and HCSL ...
The TSOP28 to DIP28 universal adapter connect the ...
The TSOP28 to DIP28 universal adapter connect the pins of an 8/16/18/20/28-pin TSOP device (width=12mm) to a 28-pin DIP equivalentIt accepts a TSOP28-12 device and plug into a DIP socketEquivalent adapters from other manufacturers: WL-TSOP28-T, PA28TS28D-EO, SA430T.