- RS Stock No.:
- 708-0101
- Mfr. Part No.:
- VNC2 DEBUG MODULE
- Brand:
- FTDI Chip
4 In Global stock for delivery within 5 working day(s)
10 In Global stock for delivery within 10 working day(s)
Added
Price (ex. GST) Each
$33.96
(exc. GST)
$37.36
(inc. GST)
Units | Per unit |
1 - 4 | $33.96 |
5 + | $30.57 |
- RS Stock No.:
- 708-0101
- Mfr. Part No.:
- VNC2 DEBUG MODULE
- Brand:
- FTDI Chip
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- CN
Product Details
Vinculum VNC2 Debug Module
The VNC2 debug module is designed to provide connectivity between the Vinculum-II IDE development software and the debug interface pin on the FTDI Vinculum-II (VNC2) USB host controller device. The VNC2 debug module consists of a miniature board with a USB miniB connector, which provides USB connectivity to Vinculum-II IDE development tools running on a PC. The VNC2 debug module can be used to program and debug firmware running on the VNC2 device. The module connects to the VNC2 device via a 6-way, 2mm pitch, keyed, female connector. The V2DIPx-x, VNC2 based development modules are equipped with a compatible male connector to host the VNC2 debug module. Designers intending to use the module with their own VNC2 based hardware are required to have a similar compatible male connector on their hardware. Details on the debug interface and connectors are outlined in subsequent sections of this document.
One USB mini-B type socket to connect with a PC
On-board FTDI FT232R which provides conversion from USB to serial interface for VNC2 debug port
Low USB bandwidth consumption
USB 2.0 Full Speed compatible
UHCI/OHCI/EHCI host controller compatible
+5V power output to V2DIP-x module (if needed)
USB powered
Programming and debugging for VNC2 IC designs
Power and traffic indicator LEDs
6-way keyed connector to support FTDIs range of V2DIPx-x development modules
-40 to +85℃ operating temperature range
On-board FTDI FT232R which provides conversion from USB to serial interface for VNC2 debug port
Low USB bandwidth consumption
USB 2.0 Full Speed compatible
UHCI/OHCI/EHCI host controller compatible
+5V power output to V2DIP-x module (if needed)
USB powered
Programming and debugging for VNC2 IC designs
Power and traffic indicator LEDs
6-way keyed connector to support FTDIs range of V2DIPx-x development modules
-40 to +85℃ operating temperature range
Specifications
Attribute | Value |
---|---|
For Use With | Viniculum-II IDE |
Related links
- Chip Programming Adapters
- Microchip AC164110, Chip Programming Adapter
- Seeit ADA-PLCC28, Chip Programming Adapter for PLS100/101
- Seeit HPRAVR, Chip Programming Adapter for AVR Series
- Seeit ADA-TQFP44 PIC16F877
- Microchip AC164111, Chip Programming Adapter PM3 ICSP for RJ-11 Adapter
- Seeit ADA-TSOP28-12 CAT28C256
- Phoenix Contact 2909681, Chip Programming Adapter Programmer...