RS PRO Brass Single Non Return Valve 3/4 in BSP

  • RS Stock No. 340-3301
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IT
Product Details

Female/Male Ports

For heating, sanitary and compressed air systems, pumps and autoclaves
Body in hot forged DZR brass
Threading to BS2779
Hostaform inner valve
Spring in 18//8 AISI 302-304 stainless steel
Hydrostatic test pressures 30 bar/435psi (shell), 22 bar/315psi (seat)
Compact design, allows flow in one direction only, indicated by arrow on valve body
Installation in vertical, horizontal or oblique pipelines
Snap-in, spring loaded non- return valve, WRC approved
Low pressure drop, prevents water hammer
Full flow area equal to nominal size

Standards

BS 2779

Specifications
Attribute Value
Type Single
Connection 3/4 in BSP
Body Material Brass
Maximum Working Pressure 16 bar
Thread Size 3/4in
Thread Standard BSP
4 : Next working day (AU stock)
223 : 5 working days (Global stock)
Price (ex. GST) Each
$ 18.14
(exc. GST)
$ 19.95
(inc. GST)
units
Per unit
1 - 5
$18.14
6 - 24
$17.60
25 - 49
$17.19
50 +
$16.86
Related Products
The Filmaster® filling loop designed to allow sealed ...
Description:
The Filmaster® filling loop designed to allow sealed heating systems to be charged via a temporary mains supply connection. 1/8in. BSP test port on isolating double check valve15mm compression connectionsProtects against Class 3 contamination risksBall valve with lever for easy ...
A range of bronze globe valves, individually hydrostatically ...
Description:
A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 barRising StemThreaded bonnetRenewable disc which is suitable for steam serviceBronze trim with glass filled PTFE diskBS21 Taper thread ...
Female screwed type bronze globe valves. These inline ...
Description:
Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. • Rising stem• PTFE renewable disk• High-quality PTFE packing• Body design conditions: PN32• 198°C at 14 bar, 100°C ...
A 240V two port zone valve for use ...
Description:
A 240V two port zone valve for use in heating systems to isolate zones or equipment. Powered open with spring return. Easy to use, clip-on detachable headPre-moulded plug and play cable supplied to connect to motorised headMetal manual operating lever ...