11-2496, Breadboard Prototyping Board 100 x 200 x 1.6mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Development Boards

DIN Type Stripboards

Suitable for use with the KM6-II eurocard sub-rack systems

The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

Note

Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

Specifications
Attribute Value
Type Prototyping Board
Length 100mm
Width 200mm
Height 1.6mm
Dimensions 100 x 200 x 1.6mm
9 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 67.70
(exc. GST)
$ 74.47
(inc. GST)
units
Per unit
1 - 9
$67.70
10 - 19
$66.35
20 - 49
$65.31
50 +
$62.51
Related Products
Our own RS Pro breadboard makes a practical ...
Description:
Our own RS Pro breadboard makes a practical and great use in everyone’s electrical kit. It provides you an efficient and effortless way to easily test or learn circuitry. The breadboard is also ideal for prototyping new circuits or even ...
A range of low density boards designed for ...
Description:
A range of low density boards designed for wiring integrated circuits.The 0 V and Vdc power supply lines are repeated on the component side of the board, increasing the distribution capacity.The contacts are replaced by individual pads designed to take ...
Converts modular 6//6 or 8//8 type connector to ...
Description:
Converts modular 6//6 or 8//8 type connector to 2.54mm (0.1inch) pitch, made from 1.6mm thick FR-4 epoxy glass, with plated-through holes. 2 boards supplied as a single V-groved sheetSupplied with connector socket.
SEG type is the optimum common earth type ...
Description:
SEG type is the optimum common earth type for high-frequency circuits2.54 mm pitch, board installation hole Ø 4 → 3.2.