Conex-Banninger 90° Elbow Solder Ring Copper Solder Fitting for 22 x 22mm Pipes

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

90° Elbow

Standards

BS 2871 Part 1; BS 864 Part 2; ISO 274; BS 219 Grade 99 C

Approvals

WRC

Solder Ring Fittings

High quality Water Research Council (WRC) approved copper solder ring capillary fittings.,Suitable for connecting copper tubes in accordance with BS2871 Part 1 and ISO 274. These potable solder ring fittings are manufactured in accordance with BS864 Part 2 and are a lead-free joint. The solder complies with BS219 Grade 99C. These products use the principle of capillary action to ensure that, when correctly joined to copper tube, a sufficient layer of lead-free solder is present between tube and fittings to form a mechanically strong, leak proof joint without the need for external solder application. Threaded components are in accordance with BS864 Part 2.,These fittings may be used with potable water, light mineral oils, natural or liquid petroleum gases or compressed air.

Specifications
Attribute Value
Fitting Direction 90°
Fitting Type Elbow
Compatible Pipe Size 22 x 22mm
Material Copper
Solder Type Solder Ring
170 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 10)
$ 1.892
(exc. GST)
$ 2.081
(inc. GST)
units
Per unit
Per Pack*
10 - 40
$1.892
$18.92
50 - 90
$1.684
$16.84
100 - 240
$1.599
$15.99
250 +
$1.559
$15.59
*price indicative
Related Products
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 ...
Description:
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 bar at 70°C Temperature Range –20 to +70°C. No need to prepare threaded pipe or apply solventEasy and quick to install, simple push-in connectionsSafe, secure and leak-proof, ready for immediate useUnique collet ...
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. No need to prepare threaded ...