Cypress Semiconductor CYBLE-014008-00 Bluetooth Chip 4.1

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CYBLE-014008-00 EZ-BLE Bluetooth Module

The CYBLE-014008-00 module contains all the necessary components to add low-power Bluetooth BLE wireless connectivity to a project design. It includes a royalty-free BLE stack compatible with the Bluetooth 4.1 standard. PSoC Creator™ provides an integrated design environment (IDE) to configure, develop, program and test a BLE application.

CY8C4 48MHz Cortex-M0 core PSoC4 with 128KB Flash memory, 16KB RAM
RF Frequency Range: 2400 to 2482MHz ISM band
RF Power Output: up to +3dBm
Receiver Sensitivity: -89dBm
OTA Data Rate: 1Mbps
Up to 25 x GPIO
CapSense™ Sigma-Delta touch sensing with SmartSense™ hardware tuning
8-channel 12-bit, 1Msps ADC with internal reference, sample-and-hold (S/H) and channel sequencer
2 x current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin
Low-power comparator that operates in Deep-Sleep mode
2 x serial communication blocks (SCB) supporting I²C (master/slave), SPI (master/slave), or UART
LCD drive supported on all GPIOs (common or segment)
4 x programmable logic blocks called universal digital blocks, (UDBs), each with eight macrocells and datapath
4 x configurable operational amplifiers
PCB antenna
Bluetooth Smart Radio and Subsystem (BLESS) contains Physical Layer (PHY) and Link Layer (LL) engines
Embedded AES-128 security engine
BLE protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer and Broadcaster roles
Standard BLE profiles and services
Power modes: Active, Sleep, Deep Sleep, Hibernate and Stop
Power supply +1.8V to +5.5Vdc
Operating temperature range: -40 to +85°C
Dimensions: 11 x 11mm, SMT format
Applications: Short range communication for the Internet of Things (IoT)


An evaluation board is available under RS Part No. 124-4198.



Attribute Value
Bluetooth Version 4.1
Maximum Output Power +3dBm
Receiver Sensitivity -87dBm
Supported Bus Interfaces I2C, SPI, UART
Supported I/O Interfaces Serial
Dimensions 11 x 11 x 1.8mm
Height 1.8mm
Length 11mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 11mm
150 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 24.05
(exc. GST)
$ 26.45
(inc. GST)
Per unit
1 - 9
10 - 24
25 - 99
100 - 499
500 +
Packaging Options:
Related Products
The ATSAMB11-ZR is an ultra-low power, fully certified ...
The ATSAMB11-ZR is an ultra-low power, fully certified Bluetooth® Low Energy module with Integrated ARM® Cortex®-M0 MCU and application Flash memory BluSDK Smart supports application profiles such as Proximity, Thermometer, Heart Rate, Blood Pressure, and many others. The qualified Bluetooth ...
BT121 Bluetooth Smart Ready Module BT121 is a ...
BT121 Bluetooth Smart Ready Module BT121 is a Bluetooth 41 Smart Ready compliant module that integrates a high performance Bluetooth radio, a low-power ARM Cortex microcontroller and a Bluegiga Bluetooth Smart Ready stack. This Smart Ready device provides simultaneous BR/EDR ...
RN4020 Bluetooth 41 BLE Module The RN4020 from ...
RN4020 Bluetooth 41 BLE Module The RN4020 from Microchip is a fully certified Bluetooth version 4.1 Low Energy (BLE or BTLE) Module. This module offers a simple embedded solution to add low-power Bluetooth communication into a design.The small form factor ...
The Microchip Technology Inc 24FC01 is a 1Kb ...
The Microchip Technology Inc 24FC01 is a 1Kb Serial EEPROM capable of speeds up to 1MHz. The device is organized as one block of 128 x 8-bit memory with a 2-wire serial interface. Its low-voltage design permits operation down to ...