Moflash LEDS100 Series Amber Flashing Beacon, 85 → 280 V ac, 85 → 380 V dc, Surface Mount, LED Bulb, IP65
- RS Stock No.:
- 865-1704
- Mfr. Part No.:
- LEDS100-05-01
- Brand:
- Moflash
Stocked by manufacturer – available for delivery 23/05/2024
Added
Price (ex. GST) Each
$77.81
(exc. GST)
$85.59
(inc. GST)
| Units | Per unit |
| 1 + | $77.81 |
Alternatives
This product is not currently available. Here are our alternative recommendations.
- RS Stock No.:
- 865-1704
- Mfr. Part No.:
- LEDS100-05-01
- Brand:
- Moflash
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Moflash Industrial ECO LED Beacon - LEDS100 Series
The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres.
The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres.
Dual function, flashing or continuous (static) mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
2 stud fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE Marked
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
2 stud fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE Marked
Moflash Amber LED Beacon, 40 to 380V DC, 85 to 285V AC - LEDS100 Series - LEDS100-05-01
This Moflash LED (light-emitting diode) beacon is used to signal hazards in commercial and industrial work environments. The warning light has a 360° output along the vertical axis to make sure the warning signal is visible in all directions. The LED bulb is bright enough to be seen clearly in most lighting conditions for effective signalling. It's also energy-efficient thanks to its low current consumption of just 35mA. For versatility, the light can be set to a flashing or continuous mode via a jumper link on the PCB (printed circuit board).
Features & Benefits
• Broad operating temperature range of -25°C to +55°C for use in demanding environments
• Polycarbonate (PC) lens material is impact-resistant and UV (ultraviolet) stable for use in harsh conditions
• Wide supply voltage range of 40 to 380V DC (direct current) or 85 to 285V AC (alternating current) for use in most set-ups
• Polycarbonate (PC) lens material is impact-resistant and UV (ultraviolet) stable for use in harsh conditions
• Wide supply voltage range of 40 to 380V DC (direct current) or 85 to 285V AC (alternating current) for use in most set-ups
Applications
• Maintenance equipment
• Emergency service vehicles
• Airport baggage claims
• Manufacturing lines
• Emergency service vehicles
• Airport baggage claims
• Manufacturing lines
Is this beacon suitable for use in damp or dusty environments?
The beacon has an IP65 (ingress protection) rating, so it's completely protected against dust and low-pressure water jets from all directions.
Specifications
Attribute | Value |
|---|---|
| Supply Voltage | 85 → 280 V ac, 85 → 380 V dc |
| Light Effect | Flashing |
| Lens Colour | Amber |
| Mounting Style | Surface Mount |
| Bulb Type | LED |
| Current Consumption | 35mA |
| Current Type | AC, DC |
| Base Diameter | 72mm |
| Housing Colour | Black |
| Lamp Included | Yes |
| Series | LEDS100 |
| Multifunction | Yes |
| Height | 107mm |
| Base Length | 33mm |
| IP Rating | IP65 |
| Maximum Temperature | +55°C |
| Special Features | Dust Proof, Low Current Consumption, Water Resistant |
| Standards Met | CE Certified |
| Minimum Temperature | -25°C |
Related links
- Moflash LEDS100 Series Green Flashing Beacon 85 → 380 V dc LED Bulb, IP65
- Moflash LED195 Series Amber Flashing Beacon 85 → 380 V dc Wall Mount, LED
- RS PRO Amber Flashing Beacon Surface Mount LED Bulb, IP65
- Moflash LEDS100 Series Green Flashing Beacon Surface Mount IP65
- Moflash LEDS100 Series Red Flashing Beacon 85 → 285 V ac LED Bulb, IP65
- Moflash LEDS100 Series Red Flashing Beacon Surface Mount IP65
- Moflash LEDS100 Series Amber Flashing Beacon Surface Mount IP65
- Moflash LEDD100 Series Amber Flashing Beacon 85 → 380 V dc LED Bulb, IP65