PAA-Sample Kit Sonitron, Audio Amplifier Module Printed Circuit Board for PAA Sample Kit

  • RS Stock No. 786-8951
  • Mfr. Part No. PAA-Sample Kit
  • Manufacturer Sonitron
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): BE
Product Details

Sonitron PAA Piezo Ceramic Design Kit

The PAA piezo ceramic audio design sample kit from Sonitron includes four different piezo audio amplifiers and is ideal for experimenting with the included speaker. The kit consists of a SPS-6555-03 speaker built into a small plastic case, with four PAA amplifiers PAA-LT3469-01, PAA-MAX9788-01, PAA-LM4960SQ-02, PAA-StepUpBTL-01.

PAA-LT3469-01 Audio Amplifier

The PAA-LT3469-01 amplifier is a piezo microactuator driver with boost regulator. From a 5 V or 12 V supply, it can drive outputs up to 33 V, and capacitive loads of 5 nF to 300 nF. An internal regulator generates a boosted supply voltage, and slew rate is limited by the maximum output current. This amplifier features high switching frequency and an internal Schottky diode. The PAA-LT3469-01 amplifier has a typical unloaded gain of 30000 and compact external components.

PAA-MAX9788-01 Audio Amplifier

The PAA-MAX9788-01 amplifier features low power consumption and a maximum output of 20 V pp. This piezo amplifier has an integrated charge pump power supply and offers fully differential outputs and inputs. This class G amplifier manages capacitive loads up to 1 μF.

PAA-LT3469-01 Audio Amplifier

Featuring a great sound output and compact design, the PAA-LT3469-01 piezo amplifier offers an integrated step up converter and bridge tied load. For a load of 600 nF, the amplifier reached 24 V pp.

PAA-StepUpBTL-01 Audio Amplifier

The PAA-StepUpBTL-01 amplifier is designed for a loud audio sound. This piezo amplifier is constructed from a bridge tied load circuit and a step up converter circuit. With an input voltage range of 5 V to 25 V, the PAA-StepUpBTL-01 offers a fixed amplification ratio of ±90.

Piezo-electric SpeakerAmplifier Modules

Specifications
Attribute Value
Accessory Type Printed Circuit Board
For Use With PAA Sample Kit
4 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 167.02
(exc. GST)
$ 183.72
(inc. GST)
units
Per unit
1 +
$167.02
Related Products
The STEVAL-CCA027V1 demonstration board is designed for the ...
Description:
The STEVAL-CCA027V1 demonstration board is designed for the TDA7492 high power dual BTL class-D audio amplifier Due to the high efficiency, the TDA7492 device is assembled in PSSO36 and is able to dissipate the generated heating with the use of ...
The STEVAL-CCA036V1 demonstration board is designed to help ...
Description:
The STEVAL-CCA036V1 demonstration board is designed to help characterize single operational amplifiers in SO8 packages With this board, the most common op-amp based circuits can be achieved. The board is designed for surface-mounted components and can be used to perform ...
Jump Wire Kit Breadboard jumper wire kit for ...
Description:
Jump Wire Kit Breadboard jumper wire kit for easy and accurate wiringSKS-290 uses high-grade jumper wires with nickel pins on both ends, allowing for easy bendingSKS-350 features phosphor bronze, nickel-plated PVC cladding, supporting inch pitches and direct contact with board ...
The STEVAL-IPM10B is a compact motor drive power ...
Description:
The STEVAL-IPM10B is a compact motor drive power board based on the SLLIMM™ (small low-loss intelligent molded module) 2nd series module STGIB10CH60TS-L It provides an affordable, easy-to-use solution for driving high power motors for a wide range of applications such ...