RS PRO Air Drill 10mm Reversible, 1/4in Air Inlet (BSP) , 1800 1/min

Compact, no charge required, last for many years and the competitive price comparing to electric tools. This is a quick overview of Air Drill, but there is much more to explore.

We are proudly introducing our own branded RS PRO Reversible Air Drill characterising of lightweight (only 1.1 kg), which makes a difference if the tasks require to make many holes.

Attractive aluminium construction with speed up to 1800 rpm is ideal for drilling, reaming and honing.

To be able to drill, you need a reliable air compressor, which is hugely important for the safe and satisfactory operation of your Air Drill. You can explore some of our air tools from the leading brands DeWALT, SIP, Welding Star or CIF below.

182-8736 Welding Star 1.5 HP 24 L Air Compressor, 114 psi
244-2715 Welding Star 2 HP 50 L Air Compressor, 114 psi
386-7828 CIF 135 W 1 L Air Compressor, 6 bar, 14.5 kg
386-7834 CIF 340 W 6 L Air Compressor, 8 bar, 21 kg
175-1191 DeWALT 0.4 HP 9.5 L Air Compressor, 9 bar, 11 kg
175-1190 DeWALT 0.4 HP 9.5 L Air Tool Accessory, 9 bar, 11 kg

The Air Drill is fully reversible with average air consumption of 4cfm / 113l/ min making the Pistol Drill a tool, which can be used in your garage or by professional users.

A significant advantage of Air Drills comparing to traditional Electric Drills is that they are straightforward construction, meaning fewer internal components and when linked with a quality air compressor provide consistent and powerful results.

Air Drills also have lower vibrations (our model has 1.5 m/s²) than electric drills, which makes them more user-friendly and safer to use.

Reversible Air Drill is easy-to-use and without any doubt will speed up your work. Drilling small diameter holes and reversible function using a drill to drive screws won't be an issue, even from a different angle.

How do I remove the chuck from my Air Drill?

This exercise is quite simple. Hold the drill down firmly, insert the chuck key and hit sharply with the mallet (turning it counter clockwise) to loosen the drill chuck from the threaded spindle. You might repeat this procedure a couple of times to reduce the chucks to unscrew the old drill chuck finally.

RS PRO is our family brand to go-to and brings you a wide range for high-quality and high-value products to support your project. Trusted by engineers all over the world, every part of every RS PRO product is always rigorously tested against demanding industry standards. We are only giving the RS PRO seal of approval if we are confident of their exceptional quality, which means you can be convinced too.