MPRLS0025PA00001A, Absolute Pressure Sensor, 25kPa 3 → 3.6 V V Output, 12-Pin SMT

  • RS Stock No. 150-3955
  • Mfr. Part No. MPRLS0025PA00001A
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Honeywell MPR Series Pressure Sensors

The MPR Series is a very small piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and compensated over a specific temperature range for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC). This product is designed to meet the requirements of higher volume medical (consumer and non-consumer) devices and commercial appliance applications.

Very small form factor: Enables portability by addressing weight, size, and space restrictions; easy to design in; occupies less area on the PCB.
Wide pressure ranges simplify use.
Enhances performance: Output accelerates performance through reduced conversion requirements and direct interface to microprocessors.
Value Solution: Cost-effective, high volume solution with configurable options.
Meets IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1 requirements: Allows avoidance of thermal and mechanical damage during solder reflow attachment and/or repair that lesser rated sensors may incur; allows unlimited floor life when stored as specified (simplifying storage and reducing scrap); eliminates lengthy bakes prior to reflow, and allows for lean manufacturing due to stability and usability shortly after reflow.
Low power/energy efficient: Reduces system power requirements and enables extended battery life.

Pressure Sensors, Honeywell

Attribute Value
Maximum Overload Pressure 60psi
Mounting Type Surface Mount
Package Type SMT
Pin Count 12
Dimensions 5 x 5 x 5.8mm
Length 5mm
Width 5mm
Height 5.8mm
Maximum Operating Pressure 25kPa
Maximum Operating Supply Voltage 3.3 V
Maximum Operating Temperature +85 °C
Maximum Output Voltage 3.6 V
Minimum Operating Pressure 0kPa
Operating Supply Voltage Range 3 → 3.6 V dc
Output Voltage Range 3 → 3.6 V V
Operating Temperature Range -40 → +85 °C
Minimum Operating Supply Voltage 3 V dc
Minimum Operating Temperature -40 °C
Operating Pressure Range 0 → 25 psi
Minimum Output Voltage 3 V
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each
$ 12.86
(exc. GST)
$ 14.15
(inc. GST)
Per unit
1 - 24
25 - 49
50 - 99
100 - 249
250 +
Packaging Options:
Related Products
TE Connectivity MS5837 Gel Filled Pressure Sensor The ...
TE Connectivity MS5837 Gel Filled Pressure Sensor The MS5837 is an ultra-compact SMT mounting digital pressure sensor from TE Connectivity The device is optimized for altimeter and barometer applications and uses a gel-filled design providing an altitude resolution of 13 ...
Barometric Air Pressure (BAP), Infineon The Barometric Air ...
Barometric Air Pressure (BAP), Infineon The Barometric Air Pressure Sensor IC is designed for use in Industrial, automotive and consumer applications as well as measuring analogue barometric air pressure The Analog absolute sensor adapts a pressure signal into an analogue ...
TE Connectivity MS5803/MS5805 Miniature Presssure Sensor Modules TE ...
TE Connectivity MS5803/MS5805 Miniature Presssure Sensor Modules TE Connectivity’s MEAS MS5803/MS5805 series of pressure sensor modules combine an ultra-low power 24-bit ΔΣ ADC with internal factory calibrated coefficients and a high linearity pressure sensor These altimeters enable users to optimise ...
LPG and CNG Gas Pressure Sensors 15 to 400 k Pa, NXP Pressure sensor types that can be used to support vehicles and industrial equipment utilising alternative fuels such as Liquefied Petroleum Gas (LPG) and Compressed Natural Gas (CNG) Pressure ...