MPRLS0300YG00001A, Absolute Pressure Sensor, 3 → 3.6 V Output, 12-Pin SMT

  • RS Stock No. 150-3952
  • Mfr. Part No. MPRLS0300YG00001A
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Honeywell MPR Series Pressure Sensors

The MPR Series is a very small piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and compensated over a specific temperature range for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC). This product is designed to meet the requirements of higher volume medical (consumer and non-consumer) devices and commercial appliance applications.

Very small form factor: Enables portability by addressing weight, size, and space restrictions; easy to design in; occupies less area on the PCB.
Wide pressure ranges simplify use.
Enhances performance: Output accelerates performance through reduced conversion requirements and direct interface to microprocessors.
Value Solution: Cost-effective, high volume solution with configurable options.
Meets IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1 requirements: Allows avoidance of thermal and mechanical damage during solder reflow attachment and/or repair that lesser rated sensors may incur; allows unlimited floor life when stored as specified (simplifying storage and reducing scrap); eliminates lengthy bakes prior to reflow, and allows for lean manufacturing due to stability and usability shortly after reflow.
Low power/energy efficient: Reduces system power requirements and enables extended battery life.

Pressure Sensors, Honeywell

Specifications
Attribute Value
Maximum Overload Pressure 60psi
Mounting Type Surface Mount
Package Type SMT
Pin Count 12
Dimensions 5 x 5 x 5.8mm
Length 5mm
Width 5mm
Height 5.8mm
Maximum Operating Supply Voltage 3.3 V
Maximum Operating Temperature +85 °C
Maximum Output Voltage 3.6 V
Operating Supply Voltage Range 3 → 3.6 V dc
Minimum Output Voltage 3 V
Operating Temperature Range -40 → +85 °C
Operating Pressure Range 0 → 300 mmHg
Minimum Operating Supply Voltage 3 V dc
Output Voltage Range 3 → 3.6 V
Minimum Operating Temperature -40 °C
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each (On a Reel of 700)
$ 8.307
(exc. GST)
$ 9.138
(inc. GST)
units
Per unit
Per Reel*
700 +
$8.307
$5,814.90
*price indicative
Related Products
Barometric Air Pressure (BAP), Infineon The Barometric Air ...
Description:
Barometric Air Pressure (BAP), Infineon The Barometric Air Pressure Sensor IC is designed for use in Industrial, automotive and consumer applications as well as measuring analogue barometric air pressure The Analog absolute sensor adapts a pressure signal into an analogue ...
Barometric Air Pressure (BAP), Infineon The Barometric Air ...
Description:
Barometric Air Pressure (BAP), Infineon The Barometric Air Pressure Sensor IC is designed for use in Industrial, automotive and consumer applications as well as measuring analogue barometric air pressure The Analog absolute sensor adapts a pressure signal into an analogue ...
TE Connectivity MS5803/MS5805 Miniature Presssure Sensor Modules TE ...
Description:
TE Connectivity MS5803/MS5805 Miniature Presssure Sensor Modules TE Connectivity’s MEAS MS5803/MS5805 series of pressure sensor modules combine an ultra-low power 24-bit ΔΣ ADC with internal factory calibrated coefficients and a high linearity pressure sensor These altimeters enable users to optimise ...
Description:
LPG and CNG Gas Pressure Sensors 15 to 400 k Pa, NXP Pressure sensor types that can be used to support vehicles and industrial equipment utilising alternative fuels such as Liquefied Petroleum Gas (LPG) and Compressed Natural Gas (CNG) Pressure ...