Cutters

Cutters are a hand held tool for cutting different materials.
Typical Types of Cutters
• Diagonal cutters are also known as side cutters. They are ideal for gripping, splicing or cutting wires, and strip insulation. They cut by indenting and wedging the wire apart and give a cleaner cut than using a knife.
• End cutters also known as nippers are used to cut through wire, springs, nails, bolts and rivets. They have an almost flat bladed head which lets you cut close against the surface without digging into it.
• Wire rope cutters for the clean shearing of wire rope without fanning. The jaws pull the wire rope into them and trap the cable.
• Bolt cutters are designed to send a large amount of torque to the cutting head to make cutting metal locks easy.
• Snipe nose or needle nose cutters are designed to hold and cut.

...
Read more Read less

Filters

Viewing 81 - 100 of 225 products
Results per page
Description Price Model Number Non Sparking Type Overall Length Jaw Length VDE/1000V Approved Height Safe ESD Safe Material Maximum Cutting Capacity Cutting Capacity Copper Wire Cutting Capacity Ductile Wire Cutting Capacity Hard Wire Cutting Capacity Iron Wire
RS Stock No. 187-8309
Mfr. Part No.64 42 115
BrandKnipex
$83.71
Each
units
- - Electronics End Cutting Nipper 115 mm 10mm - - - Tool Steel 1.5mm - - 0.5mm -
RS Stock No. 815-6394
Mfr. Part No.77 32 120 H ESD
BrandKnipex
$203.28
Each
units
- - Electronics Diagonal Cutters 120 mm 14mm - - Yes Carbide 0.6mm - - 0.6mm -
RS Stock No. 815-6378
Mfr. Part No.95 05 155 SB
BrandKnipex
$45.05
Each
units
- - Shear Cutter 155 mm - - - - Stainless Steel - - - - -
RS Stock No. 834-8016
Mfr. Part No.3-971-15
$97.19
Each
units
- - Electronics Diagonal Cutters 125 mm - - - Yes Chrome Vanadium Steel 1.6mm - - 0.5mm -
RS Stock No. 239-3900
Mfr. Part No.670EP
$122.44
Each
units
670EP - Electronics Diagonal Cutters 110 mm 9mm - - Yes Tool Steel 0.6mm 0.6mm - - -
RS Stock No. 847-8076
Mfr. Part No.6745080
BrandGedore
$74.59
Each
units
8316 JC - Side Cutter 200 mm 22mm - - - Steel 2mm - - - -
RS Stock No. 847-8079
Mfr. Part No.8316-160 JC
BrandGedore
$62.98
Each
units
8316 JC - Side Cutter 160 mm 19mm - - - Steel 1.6mm - - - -
RS Stock No. 787-0360
Mfr. Part No.25.E5151.CRBG
BrandIdealtek
$74.61
Each
units
- - Electronics Diagonal Cutters 125 mm 12.5mm - - Yes Ball Bearing Steel - - - - -
RS Stock No. 787-0402
Mfr. Part No.E5342.CR.BG.ITR
BrandIdealtek
$68.35
Each
units
- - Electronics Diagonal Cutters 125 mm 10mm - - Yes Ball Bearing Steel - - - - -
RS Stock No. 910-7175
Mfr. Part No.T3888
BrandCK
$26.51
Each
units
- - Electronics Diagonal Cutters 135 mm - - - Yes - - 1.6mm - - -
RS Stock No. 910-7157
Mfr. Part No.T3883
BrandCK
$22.53
Each
units
- - Electronics Diagonal Cutters 132 mm - - - Yes - - 1.3mm - - -
RS Stock No. 158-5732
Mfr. Part No.78 13 125
BrandKnipex
$69.18
Each
units
- - Electronics Diagonal Cutters 125 mm - - - - - - - - - -
RS Stock No. 158-5344
Mfr. Part No.74 06 180
BrandKnipex
$81.31
Each
units
- - VDE High Leverage Diagonal Cutters 180 mm - - - - - - - - - -
RS Stock No. 158-5710
Mfr. Part No.77 02 115 SB
BrandKnipex
$81.64
Each
units
- - Electronics Diagonal Cutters 115 mm - - - - - - - - - -
RS Stock No. 794-7785
Mfr. Part No.412B.10
BrandFacom
$116.82
Each
units
- - Cable Cutter 170 mm 40mm - - - - 10mm 10mm - - -
RS Stock No. 787-0409
Mfr. Part No.25.E5541.CRBG
BrandIdealtek
$87.90
Each
units
- - Electronics Diagonal Cutters 125 mm 10mm - - Yes Ball Bearing Steel - - - - -
RS Stock No. 847-2986
Mfr. Part No.E5350
BrandIdealtek
$65.38
Each
units
- - Electronics Diagonal Cutters 125 mm 12.5mm - - Yes Ball Bearing Steel 1.6mm - - 0.03 → 0.7mm -
RS Stock No. 834-8000
Mfr. Part No.3-967-15
$85.49
Each
units
- - Electronics Diagonal Cutters 120 mm - - - Yes Chrome Vanadium Steel 0.8mm - - - -
RS Stock No. 182-357
Mfr. Part No.2432E
$120.29
Each
units
- - Electronics Diagonal Cutters 130 mm 12mm - - Yes Tool Steel 1.6mm 1.6mm - - -
RS Stock No. 158-5568
Mfr. Part No.67 01 160 SB
BrandKnipex
$53.90
Each
units
- - End Cutter 160 mm - - - - Chrome Vanadium Steel 4.5mm - - 2.5mm -
Related Products
High-quality diagonal cutting pliers with angled head for ...
Description:
High-quality diagonal cutting pliers with angled head for flush cuts. Manufactured from heat treated high chrome steel, with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a more comfortable controlled grip. Ideal for electronics work, cutting tempered ...
The TriCut electric installation pliers, designed for 3 ...
Description:
The TriCut electric installation pliers, designed for 3 practical functions; cutting, skinning and stripping. Featuring a specially angled head to ensure that cables are stripped and skinned lengthwise along the cable. Using an ergonomic approach, which saves users from applying ...
Manufactured from Chrome Vanadium electric steelTwelve degree angled ...
Description:
Manufactured from Chrome Vanadium electric steelTwelve degree angled bladeHigh cutting performance for piano wire, rivets, bolts, etcChrome Vanadium polished cutting jaws induction hardened to 64HRCFitted with soft grip handles.
Thin nosed with flush cutting edges for easy ...
Description:
Thin nosed with flush cutting edges for easy access to component leads. These special cutting and forming pliers having substantial pressed steel frames, chemically blackened, with return springs and plastic grips for easy, comfortable handling. Cutting edges are ground to ...