Rivet Guns

A rivet gun, also known as a pneumatic hammer, is a tool used to drive rivets. The rivet gun is pushed on to the pin of the rivet, as the gun is operated the pin head is pulled into the rivet and the end of the rivet is expanded. The pin breaks off leaving the rivet permanently fixed in position holding the two pieces of material together.Rivet Gun TypesRivet guns vary in size and shape and have a variety of handles and grips.Pneumatic rivet guns - Regulated air passes through a throttle valve which is typically controlled by a trigger in the hand grip. When the trigger is squeezed, the throttle valve opens, allowing the pressurized air to flow into the piston. The provides a higher amount of force to the rivet reducing risk of damage and creating uniformity in the positioning and depth of the rivets.Slow-hitting gun - For use on hard rivets, slow-hitting rivet guns deliver repeated blows to the rivet as long as the trigger is compressed. Averaging approximately 2,500 bpm (blows per minute) offering increased control, accuracy and less kick than guns that deliver a single blow.Fast-hitting gun – These operate in a similar way to the slow-hitting versions, but at a higher rate of speed. The faster blows are less intense than the slower blows, making this type of gun more appropriate for rivets made of softer materials.

...
Read more Read less

Filters

Viewing 1 - 8 of 8 products
Results per page
Description Price Length Weight Maximum Rivet Size Air Inlet BSP Model Number
RS Stock No. 739-8427
BrandRS PRO
$228.24
Each
units
175mm 1.6kg 3/16 in 1/4in APT690
New
RS Stock No. 192-3666
BrandRS PRO
$47.00
Each
units
265mm 560g 4.8 mm - -
RS Stock No. 468-3564
Mfr. Part No.580-701
BrandMTI
$204.31
Each
units
- - 4.8 mm - -
RS Stock No. 763-0790
Mfr. Part No.BP125
BrandBahco
$800.43
Each
units
290mm 2kg 6.4 mm - BP125
New
RS Stock No. 198-1848
Mfr. Part No.HR01
BrandTeng Tools
$113.46
Each
units
30mm 600g 4.8 mm - HR01
RS Stock No. 181-2922
Mfr. Part No.TAR 481220
BrandPREVOST
$308.66
Each
units
273mm 1.5kg 4.8 mm mm 1/4 BSPF TAR 481220
New
RS Stock No. 198-1787
Mfr. Part No.HN02
BrandTeng Tools
$210.15
Each
units
30mm 800g - - HN02
RS Stock No. 181-2923
Mfr. Part No.TAR 641895
BrandPREVOST
$728.33
Each
units
273mm 2.1kg 6.4 mm mm 1/4 BSPF TAR 641895
Related Products
Pistol-grip handle Supplied with a set of 19 ...
Description:
Pistol-grip handle Supplied with a set of 19 needles, diam 3 mm Comfortable grip Suitable for prolonged work in difficult conditions ApplICat IonsStripping of rust, welding, layers of paint and other coatings using a hammering action. Also used in certain ...
Special version designed for removing dust, debris and ...
Description:
Special version designed for removing dust, debris and swarf from blind holes up to 18 inches deep Plastic probe jets high pressure air into the hole to dislodge particles which are safely sucked away by the main nozzle Main nozzle ...
The 27102 series blow guns are ergonomicaly designed ...
Description:
The 27102 series blow guns are ergonomicaly designed and feature a hardwearing scratch resistant composite body • Smooth shape and finish prevents dust and filings build up on trigger and case. • Directional jet • Brass insert connection • Smooth ...
Combines progressive flow control, safety, energy saving and ...
Description:
Combines progressive flow control, safety, energy saving and ergonomy Conforms with regulations of cleaning operations. Its integrated inviolable flow reducer provides full and active safety. The flow reducer system allows for 40% saving in air consumption and guarantees stable flow ...