Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filters

    Viewing 21 - 40 of 158 products
    Results per page
    Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
    RS Stock No. 175-0162
    BrandRS PRO
    $136.27
    Each
    units
    Test Lead Set Automotive Back Probe - Yes 1.25m 10A 600 V, 1000 V CAT III 600 V, CAT IV 1000 V - - CAT III, CAT IV
    RS Stock No. 125-3730
    BrandRS PRO
    $69.49
    Each
    units
    Test Lead - Crocodile Clip Yes - - - - - - -
    RS Stock No. 125-3736
    BrandRS PRO
    $29.83
    Each
    units
    Test Lead - - - 1.2m 20A 600 V, 1000 V CAT III, CAT IV, 600 V, 1000 V - - CAT III, CAT IV
    RS Stock No. 125-3733
    BrandRS PRO
    $57.90
    Each
    units
    Test Lead Kit - Crocodile Clip, Right Angle Plug - 1.2m 15A 1000V CAT III 1000 V - - CAT III
    RS Stock No. 125-3735
    BrandRS PRO
    $40.42
    Each
    units
    Test Lead Kit - Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug - 1.2m 15A 1000V CAT III 1000 V - - CAT III
    RS Stock No. 125-3732
    BrandRS PRO
    $59.76
    Each
    units
    Fused Probe Kit - Straight Plug Yes 1.2m - 1000V CAT III 1000 V -10°C +150°C CAT III
    RS Stock No. 125-3734
    BrandRS PRO
    $41.37
    Each
    units
    Fused Test Prods - Banana Jack Yes - - 1000V CAT III 1000 V - - CAT III
    RS Stock No. 125-3731
    BrandRS PRO
    $61.20
    Each
    units
    Test Lead Kit - Right Angle Plug Yes 1.25m - 1000V CAT III 1000 V - - CAT III
    RS Stock No. 384-8243
    Mfr. Part No.1641351
    BrandFluke
    $57.00
    Each
    units
    Test Lead Kit - Right Angle - 1.5m 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 611-098
    Mfr. Part No.1641588
    BrandFluke
    $43.00
    Each
    units
    Test Lead Kit - Banana Plug - 1.22m 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 468-7415
    Mfr. Part No.TL76
    BrandFluke
    $61.56
    Each
    units
    Test Lead Kit - Banana Plug, Shrouded 4 mm - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 741-4358
    Mfr. Part No.TL175
    BrandFluke
    $57.00
    Each
    units
    Test Lead Kit - Shrouded - - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V -20°C +55°C CAT III, CAT IV
    RS Stock No. 412-119
    Mfr. Part No.FLUKE TLK287
    BrandFluke
    $280.00
    Each
    units
    Electronic Master Test Lead Kit - Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug - - 10 A, 2 A, 5 A 1000 V, 300 V CAT II 300 V, CAT III 1000 V - - CAT II, CAT III
    RS Stock No. 705-1276
    Mfr. Part No.TL175E
    BrandFluke
    $60.57
    Each
    units
    Test Lead - 4 mm Banana Plug - 1.2m 10A 1000V CAT II, CAT II 1000 V, CAT III 1000 V - - CAT II, CAT III
    RS Stock No. 468-7358
    Mfr. Part No.L215
    BrandFluke
    $176.69
    Each
    units
    SureGrip Kit with Probe Light & Extender - - - - - - - - - -
    RS Stock No. 450-2358
    Mfr. Part No.TL224
    BrandFluke
    $56.00
    Each
    units
    Silicone Test Lead Set - Banana Plug - 1.5m 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 493-3285
    Mfr. Part No.TP88
    BrandFluke
    $30.90
    1 Set
    Set(s)
    Rigid Back Probe Pin Set - 2 mm - 2in - 60V dc - - - -
    RS Stock No. 436-866
    Mfr. Part No.TLK289
    BrandFluke
    $280.00
    Each
    units
    Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm - - - - - - - -
    RS Stock No. 902-7723
    Mfr. Part No.TL80A
    BrandFluke
    $133.96
    Each
    units
    Electronic Test Lead Kit - Alligator Clip - 1m - 300V CAT III 1000 V - - CAT III
    RS Stock No. 324-5975
    Mfr. Part No.TL81A
    BrandFluke
    $326.00
    Each
    units
    Electronic Test Lead Kit - Crocodile Clip, Hook Clip - 1m 10 A, 3 A, 5 A 300V CAT II 300 V - - CAT II
    Related Products
    IDM70 Series Compact Multimeters with high performance Large ...
    Description:
    IDM70 Series Compact Multimeters with high performance Large scale display6000 display countDCA μA Data Hold Min/ Max function Frequency Counter Capacitance Measurement Auto Power Off Shock resistant (1m drop) Protective Holster with tilt stand and lead storage.
    All-Metal Versions as Well as Types for Insulated ...
    Description:
    All-Metal Versions as Well as Types for Insulated Fitting Shock-Proof Safety Sockets for Use Up to 1000 V.Safety Sockets to Adapt From Old 4 Mm Sockets.Terminations for Printed Circuit Board, for Cable Lugs or with Push-On Connection.Loading Up to 32 ...
    Slim-Line Binding Post, 15 Amps, 1000V The BU‐P4243 ...
    Description:
    Slim-Line Binding Post, 15 Amps, 1000V The BU‐P4243 is a slim‐line binding post which accepts non‐shrouded and retractable 4mm banana plugs as well as bare wire and 7mm (ID) spade connectors. Internal wires connected by solder post.Material: Bright Tin Plated ...
    Banana plugs fit all standard 4mm banana jacks ...
    Description:
    Banana plugs fit all standard 4mm banana jacks Spring loaded, clear retractable banana sheath provides electrical protection when cable is not mounted and slides out of the way when pressed into a non-insulated Jack. Built in Jack will accept any ...