Micrometers

What are micrometers?A micrometer (sometimes called micrometer screw gauge) is a precision measuring instrument, used to obtain very fine measurements and available in metric and imperial versions. They use a calibrated screw or thread (found internally on the spindle) for precise measurement of components in mechanical engineering and machining as well as most mechanical trades. They usually come in the form of calipers e.g. opposing ends joined by a frame. Micrometers are composed of: Frame - The C-shaped body that holds the anvil and barrel in constant relation to each other. Anvil - The shiny part that the spindle moves toward, and that the sample rests against. Sleeve / barrel / stock - The stationary round component with the linear scale on it, sometimes with vernier markings. Lock nut / lock-ring / thimble lock - The knurled component (or lever) that tightens to hold the spindle stationary. Spindle - The shiny cylindrical component that the thimble causes to move toward the anvil Thimble - The component that turns by using a persons thumb. Graduated markings. Ratchet stop - Device on end of handle that limits applied pressure by slipping at a calibrated torque. ScrewHow do they work?The precision is determined by the thread pitch of the spindle. The spindle is a very accurately machined screw and the object to be measured is placed between the spindle and the anvil. The spindle is moved by turning the ratchet knob or thimble until the object to be measured is lightly touched by both the spindle and the anvil.Types of Micrometers Outside micrometer: most common type used to measure external dimensions such as the outside diameter of an object. Inside micrometer; used to measure inside dimensions like the inside diameter of a hole or tube. There are two types: caliper-type and tubular and rod. Depth micrometer: these are used to measure the depths of holes, slots and steps. They come with a variety of interchangeable rods of different lengths so that they can be used to measure a range of depths. Advantages Provide very accurate measurements and are considered one of the most accurate types of measuring device. Ratchet speeder helps to provide reliable measurements. Integrated scales, the sleeve scale and thimble scale are built into the tool, another measuring instrument such as a ruler or tape measure is not required. Durability and long lasting and unlikely to need replacing or repairing

...
Read more Read less

Filters

Viewing 1 - 20 of 62 products
Results per page
Description Price Accuracy Resolution Imperial or Metric Micrometer Type SPC Data Output Data Processing Battery Operated Set Contents Metric-Imperial Conversion Maximum Measurement Minimum Measurement
RS Stock No. 833-6442
Mfr. Part No.293-340-30
BrandMitutoyo
$469.79
Each
units
±0.00005 in 0.001 mm Both External - - Yes - - 1in 0in
RS Stock No. 833-6427
Mfr. Part No.293-240-30
BrandMitutoyo
$455.21
Each
units
±1 μm 0.001 mm Metric External - - Yes - - 25mm 0mm
RS Stock No. 833-6436
Mfr. Part No.293-821-30
BrandMitutoyo
$332.61
Each
units
±2 μm 0.001 mm Metric External - - Yes - - 25mm 0mm
RS Stock No. 705-1229
BrandRS PRO
$149.92
Each
units
±0.002 mm 0.001 mm Both External - - Yes - Yes 25mm 0mm
RS Stock No. 397-6584
Mfr. Part No.102-217
BrandMitutoyo
$107.60
Each
units
±0.002 mm 0.01 mm Metric External - - No Case, Gauge - 25mm 0mm
RS Stock No. 833-6445
Mfr. Part No.293-831-30
BrandMitutoyo
$343.06
Each
units
±0.0001 in 0.001 mm Both External - - Yes - - 1in 0in
RS Stock No. 794-3519
Mfr. Part No.293-145-30
BrandMitutoyo
$483.95
Each
units
±1 μm 0.001 mm Metric Special - Yes Yes - - 25mm 0mm
RS Stock No. 432-255
Mfr. Part No.101468M
BrandMitutoyo
$20.45
Each
units
- - Metric Special - - No - - - -
RS Stock No. 705-1213
BrandRS PRO
$407.33
1 Set
Set(s)
±0.004 mm 0.01 mm Metric External - - No Setting Rod - 150mm 0mm
RS Stock No. 572-088
Mfr. Part No.103-137
BrandMitutoyo
$107.25
Each
units
±0.002 mm 0.01 mm Metric External - - No Adjustment Tool, Case, User Manual - 25mm 0mm
RS Stock No. 705-1279
BrandRS PRO
$577.25
Each
units
±0.002 mm 0.001 mm Both Special - - Yes Battery, Case, User Manual Yes 25mm 0mm
RS Stock No. 486-8254
Mfr. Part No.293-344
BrandMitutoyo
$359.66
Each
units
±0.00005 in 0.00005 in Both External - - Yes Battery, Case, User Manual Yes 1in 0in
RS Stock No. 833-6433
Mfr. Part No.293-330-30
BrandMitutoyo
$545.11
Each
units
±0.00005 in 0.001 mm Both External Yes - Yes - - 1in 0in
RS Stock No. 705-1216
BrandRS PRO
$260.26
Each
units
±0.002 mm 0.001 mm Both External - - Yes Battery, Case, User Manual Yes 25mm 0mm
RS Stock No. 725-5733
BrandRS PRO
$93.48
Each
units
±0.004 mm 0.01 mm Metric External - - No - - 25mm 0mm
RS Stock No. 794-3522
Mfr. Part No.293-140-30
BrandMitutoyo
$693.02
Each
units
±1 μm 0.001 mm Metric Special Yes Yes Yes - - 25mm 0mm
RS Stock No. 795-9906
Mfr. Part No.368-913
BrandMitutoyo
$4,410.09
Each
units
- 0.005 mm Metric Internal - - No 368-166, 368-167, 368-168, 368-169 - 50mm 20mm
RS Stock No. 794-3525
Mfr. Part No.293-141
BrandMitutoyo
$751.76
Each
units
±1 μm 0.001 mm Metric Special Yes Yes Yes - - 50mm 25mm
RS Stock No. 572-123
Mfr. Part No.103-139-10H
BrandMitutoyo
$184.75
Each
units
±0.002 mm 0.01 mm Metric External - - No Adjustment Tool, Case, Stand, User Manual - 75mm 50mm
RS Stock No. 397-6590
Mfr. Part No.102-218
BrandMitutoyo
$151.52
Each
units
±0.002 mm 0.01 mm Metric External - - No Case, Gauge - 50mm 25mm
Related Products
RS Pro 2 piece general purpose measuring set, ...
Description:
RS Pro 2 piece general purpose measuring set, precision caliper and micro-meter for accuracy in a wide range of measuring applications Fully hardened stainless steel construction with an anti-glare, satin chrome finish. All measuring surfaces are ground and lapped for ...
Graduated 0001in./0.01mm Accurate to BS870Steel spindles with ground ...
Description:
Graduated 0001in./0.01mm Accurate to BS870Steel spindles with ground threads and measuring faces tipped with hard micro-lapped tungsten carbide Positive spindle lock fitted Thimble is fitted with a ratchet stop to ensure a constant measuring force and consistent readings.
Graduated 0001in./0.01mm Accurate to BS870Steel spindles with ground ...
Description:
Graduated 0001in./0.01mm Accurate to BS870Steel spindles with ground threads and measuring faces tipped with hard micro-lapped tungsten carbide Positive spindle lock fitted Thimble is fitted with a ratchet stop to ensure a constant measuring force and consistent readings.
The RS Pro 3 piece mechanical micrometer set ...
Description:
The RS Pro 3 piece mechanical micrometer set conforms to DIN 863 The micrometer has micro fine graduations for accurate depth, length and thickness reading. • Spindle locking lever • Ratchet stop • Supplied in fitted case with adjustable tools ...