Electronic Loads

What is an electronic load?


An electronic load is a type of device used for testing a range of power supplies such as a battery, solar cell, electronic component, portable charger and more. Electronic loads are available in a range of sizes to accompany a variety of applications, including low to high power consumption.


Electronic loads are available as either AC or DC loads and are vital for measuring power supplies via rapidly increasing and decreasing the load in a repeatable fashion, which can not be achieved by hand.


Types of electronic loads


There are four main types of electronic loads including bench top, slot, system and modular. Depending on the type of application will determine the type of load required. Each type of load varies in input voltage, current, power and frequency, with multiple configuration options. Many electronic loads feature an interface with a screen and navigation buttons for ease of use, allowing you to easily configure the device. Certain electronic loads can also be controlled remotely via an Ethernet, USB, or GPIB interface.


Application


Electronic Loads are used in a wide range of applications where the test and measurement of a power supply is required. They are commonly used in areas such as:


  • Aerospace
  • Laboratory
  • Car battery manufacturers
  • Fuel-cell manufacturers
  • Cell-phone manufacturers
  • Solar panel manufacturers

...
Read more Read less

Filters

Viewing 1 - 8 of 8 products
Results per page
Description Price Series Constant Wattage Mode Range Constant Voltage Mode Range Constant Current Mode Range Constant Resistance Mode Range Efficiency Rack Units
RS Stock No. 917-6566
Mfr. Part No.2380-120-60
BrandKeithley
$2,976.75
Each
units
2380 Maximum of 250 W 0 → 120 V 0 → 60 A 10 Ω → 7.5 kΩ - 1 U
RS Stock No. 817-2210
Mfr. Part No.BK8540
$1,046.77
Each
units
8500 - 0.1 → 60 V 0 → 30 A 0.1 → 10 Ω - -
RS Stock No. 837-7544
Mfr. Part No.LD400P
BrandAim-TTi
$2,328.90
Each
units
LD400 Series 0 → 400 W Maximum of 8 V @ 1mV, Maximum of 80 V @ 10mV 0 → 8 A @ 1mA, 0 → 80 A @ 10mA 0.04 → 10 Ω @ 0.01Ω, 2 → 400 Ω @ 0.1Ω - 1 U
RS Stock No. 817-2204
Mfr. Part No.BK8500
$2,040.66
Each
units
8500 - 0.1 → 120 V 0 → 30 A 0.1 → 10 Ω - -
RS Stock No. 817-2207
Mfr. Part No.BK8502
$2,481.23
Each
units
8500 - 0.1 → 500 V 0 → 15 A 0.1 → 10 Ω - -
RS Stock No. 493-7861
Mfr. Part No.K850A
$1,384.62
Each
units
32 EL 0 → 150 W 0 → 360 V 0 → 30 A - - -
RS Stock No. 878-2129
Mfr. Part No.BK8600
$2,229.23
Each
units
BK86 0 → 150 W 0 → 120 V 0 → 3 (Low) A, 0 → 30 (High) A Maximum of 35 mΩ ≤95 % 19 in
RS Stock No. 917-6569
Mfr. Part No.2380-500-15
BrandKeithley
$3,118.50
Each
units
2380 Maximum of 200 W 0.1 → 500 V 0 → 15 A 10 Ω → 7.5 kΩ - 1 U
Related Products
Kikusui PMX-A Series is a compact, high-performance DC ...
Description:
Kikusui PMX-A Series is a compact, high-performance DC power supply which provides constant voltage (CV) and constant current (CC). It is designed for benchtop efficiency, with the ergonomically-designed output terminals located on the front panel (so that wiring harnesses for ...
Nickel plated brass housingIP67LED indication Operating temperature range ...
Description:
Nickel plated brass housingIP67LED indication Operating temperature range -25 → +80°C4mA No load currentShort circuit, overload and reverse polarity protectionPre-wired with 2m of PUR cable.
Optalloy plated brass housing IP67 Four switching status ...
Description:
Optalloy plated brass housing IP67 Four switching status LEDs A setting LED to indicate optimum sensing range Operating temperature range -25 → +70°C 4mA No load current Short circuit, overload and reverse polarity protection M12 Plug in, suitable for 4 ...
AS-I is a method of providing communication from ...
Description:
AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.A unique feature of the AS-I system ...