DIP & SIP Switches

A DIP Switch or dual in-line package switch”, is a manual electrical switch that is packaged with other circuits to control the flow of electricity.



How do DIP switches work?
They work simply with on or off switches on the DIP switch its self that tells electricity to flow through the switch once “on” has been achieved. 
For a more detailed explanation and to read more about the type of switches available, check out our complete guide to DIP switches.


Features and benefits:



  • Gold contacts on some models for high reliability

  • Good replacement for jumpers

  • Units vary with 1 through to 32 poles.

  • Longer poles in some models save loading time in production.

  • Can be modified by cutting the poles to the required level

  • Good service temperature ranges for all environment

  • Offer resistance to shock and vibrations in some models

  • Inexpensive

  • Can check settings without powering them on


Where might I use DIP and SIP switches?



  • PC expansion cards

  • Arcade machines

  • Automatic garage doors

  • Industrial sectors


...
Read more Read less

Filters

Viewing 1141 - 1143 of 1143 products
Results per page
Description Price Contact Configuration Contact Current Rating Contact Material Number of Positions Mounting Type Actuator Type Package Style Mechanical Life Maximum Operating Temperature Minimum Operating Temperature Operating Temperature Range IP Rating Dielectric Strength Voltage Rating
RS Stock No. 177-4254
Mfr. Part No.209-8MS
BrandCTS
$1.762
Each (In a Pack of 5)
units
Single Pole Single Throw (SPST) 0.1 (Switching) mA, 100 (Non Switching) mA, 100 (Switching) mA Beryllium Copper 8 Through Hole - DIP - +85°C -40°C -40 → +85°C - 500V ac 5 V dc, 20 V dc, 50 (Non Switching) V dc
RS Stock No. 473-2666
Mfr. Part No.SD-1030B
$4.06
Each
units
- 100 mA@ 5 V dc Gold Plated Copper Alloy 16 PCB Rotary Flush DIP - +85°C -25°C -25 → +85°C - 250V ac -
RS Stock No. 177-4253
Mfr. Part No.219-10MST
BrandCTS
$2.138
Each (In a Pack of 5)
units
Single Pole Single Throw (SPST) 0.1 (Switching) mA, 100 (Non Switching) mA, 100 (Switching) mA Beryllium Copper 10 Surface Mount - DIP - +85°C -55°C -55 → +85°C - 500V dc 5 V dc, 20 V dc, 50 (Non Switching) V dc
Related Products
Gold contacts, available in a choice of configurationsThese ...
Description:
Gold contacts, available in a choice of configurationsThese switches are suitable for edge of board locations for timing, counting and coding circuitsChangeover types have make-before-break contactsNon switching rating: lever actuator; 100mA @ 50Vdc, Piano actuator; 100mA @ 100VdcContact resistance: 50mΩ. ...
Available in a choice of configurationsChangeover (SPDT) types ...
Description:
Available in a choice of configurationsChangeover (SPDT) types have break-before-make contacts (pairs of pins along one side of the switch must be commoned to achieve a changeover action)Suitable for dry circuit switchingNon switching rating: 5A @ 100VacContact resistance: 10mΩ.
The CTS is an 8-way through hole mount ...
Description:
The CTS is an 8-way through hole mount DIP SPST switch. Its unique design and construction provides superior ESD protection. When the OFF side terminals are connected to the ground, they are moulded into the thermoset base and provides electrostatic ...
Sub-miniature switches in a choice of configurations and ...
Description:
Sub-miniature switches in a choice of configurations and actions. Note that these switches are not suitable for immersion cleaning unless stated otherwise. Very low profile DIL switches, can be wave soldered.Tinned outputs.Recessed slide to indexed position.Self-cleaning sliding contacts.