Audio ADCs

An audio ADC is a type of analogue to digital converter that converts analogue sounds into digital signals using a mathematical function called quantisation. This conversion occurs periodically instead of continually to minimise noise generation. ADCs sample the input signals at specific points in time which reduces the allowable bandwidth of the input signal for increased efficiency.


What are audio ADCs used for?

ADCs are useful in dynamic range and dynamic specification applications. This is important in applications like vibration, seismic and geographical analysis. Other applications include microphones in radio, TV, electronic consumer and homeware devices. ADCs are also an important feature in telecommunication equipment, which requires analogue to digital conversion in order to produce good quality sound.


Types of audio ADCs

There are many types of audio ADCs. Choosing the right audio ADC depends on the number of channels your device has and the amount of analogue inputs and outputs required. You should also consider the required bit rates and the level of control/audio interface in engineering applications when choosing an Audio ADC.


...
Read more Read less

Filters

Viewing 1 - 20 of 28 products
Results per page
Description Price Architecture Number of ADCs Resolution Sampling Rate Input Signal Type Mounting Type Package Type Pin Count Integral Nonlinearity Error Digital Interface Type Power Supply Type Typical Single Supply Voltage Typical Dual Supply Voltage Dimensions
RS Stock No. 461-9147
Mfr. Part No.PCM1804DB
$8.34
Each
units
Delta Sigma 2 24 bit 192ksps Differential Surface Mount SSOP 28 - Serial - 5 V - 10.2 x 5.3 x 1.95mm
RS Stock No. 162-4262
Mfr. Part No.PCM1804DB
$7.977
Each (In a Tube of 47)
units
Delta Sigma 2 24 bit 192ksps Differential Surface Mount SSOP 28 - Serial - 5 V - 10.2 x 5.3 x 1.95mm
RS Stock No. 145-6121
Mfr. Part No.PCM1807PW
$3.141
Each (In a Tube of 90)
units
Delta Sigma 2 24 bit 96ksps Single Ended Surface Mount TSSOP 14 - Serial - 5 V - 5 x 4.4 x 1.15mm
RS Stock No. 662-0155
Mfr. Part No.PCM1807PW
$4.018
Each (In a Pack of 5)
units
Delta Sigma 2 24 bit 96ksps Single Ended Surface Mount TSSOP 14 - Serial - 5 V - 5 x 4.4 x 1.15mm
RS Stock No. 908-3896
Mfr. Part No.PCM1862DBT
$5.345
Each (In a Pack of 2)
units
- 2 24 bit 192kHz Differential Surface Mount TSSOP 30 - Serial (I2C) Single 3.3 V - 7.9 x 4.5 x 1.05mm
RS Stock No. 162-5845
Mfr. Part No.PCM1870RHFT
$6.23
Each (On a Reel of 250)
units
Delta Sigma 2 16 bit 50ksps Differential, Single Ended Surface Mount QFN 24 - Serial - 3.3 V - 5 x 4 x 0.9mm
RS Stock No. 709-4822
Mfr. Part No.AD677JNZ
$89.60
Each
units
SAR 1 16 bit 100ksps Single Ended Through Hole PDIP 16 ±2LSB Serial - - ±12V 20.07 x 6.35 x 3.3mm
RS Stock No. 661-9988
Mfr. Part No.PCM1870RHFT
$7.18
Each
units
Delta Sigma 2 16 bit 50ksps Differential, Single Ended Surface Mount QFN 24 - Serial - 3.3 V - 5 x 4 x 0.9mm
RS Stock No. 145-7463
Mfr. Part No.PCM1862DBT
$4.861
Each (In a Tube of 60)
units
- 2 24 bit 192kHz Differential Surface Mount TSSOP 30 - Serial (I2C) Single 3.3 V - 7.9 x 4.5 x 1.05mm
RS Stock No. 158-2571
Mfr. Part No.AD677JNZ
$98.52
Each (In a Tube of 25)
units
SAR 1 16 bit 100ksps Single Ended Through Hole PDIP 16 ±2LSB Serial - - ±12V 20.07 x 6.35 x 3.3mm
RS Stock No. 145-6665
Mfr. Part No.PCM1860DBT
$4.28
Each (In a Tube of 60)
units
- 2 24 bit 192kHz Differential Surface Mount TSSOP 30 - Serial (4 Wire), Serial (I2C), Serial (SPI) Single 3.3 V - 7.9 x 4.5 x 1.05mm
RS Stock No. 162-7845
Mfr. Part No.TLV320ADC3001IYZHT
$4.01
Each (On a Reel of 250)
units
Delta Sigma 2 24 bit 96ksps Differential, Single Ended Surface Mount WSCP 16 - Serial Single 1.8 (Digital) V, 3.3 (Analogue) V - 2.271 x 2.19 x 0.275mm
RS Stock No. 661-9997
Mfr. Part No.PCM4202DBT
$11.34
Each
units
Delta Sigma 2 24 bit 216ksps Differential, Single Ended Surface Mount SSOP 28 - Serial - 5 V - 10.2 x 5.3 x 1.95mm
RS Stock No. 545-7805
Mfr. Part No.PCM4202DB
$12.53
Each
units
Delta Sigma 2 24 bit 216ksps Differential, Single Ended Surface Mount SSOP 28 - Serial - 5 V - 10.2 x 5.3 x 1.95mm
RS Stock No. 162-5847
Mfr. Part No.PCM4202DBT
$9.452
Each (On a Reel of 250)
units
Delta Sigma 2 24 bit 216ksps Differential, Single Ended Surface Mount SSOP 28 - Serial - 5 V - 10.2 x 5.3 x 1.95mm
RS Stock No. 145-7315
Mfr. Part No.PCM4202DB
$12.051
Each (In a Tube of 50)
units
Delta Sigma 2 24 bit 216ksps Differential, Single Ended Surface Mount SSOP 28 - Serial - 5 V - 10.2 x 5.3 x 1.95mm
RS Stock No. 161-0162
Mfr. Part No.AD1871YRSZ
$13.579
Each (In a Tube of 47)
units
Delta Sigma 2 24 bit 96ksps Differential, Single Ended Surface Mount SSOP 28 - Serial - 5 V - 10.2 x 5.3 x 1.75mm
RS Stock No. 812-4040
Mfr. Part No.TLV320ADC3001IYZHT
$4.286
Each (On a Tape of 5)
units
Delta Sigma 2 24 bit 96ksps Differential, Single Ended Surface Mount WSCP 16 - Serial Single 1.8 (Digital) V, 3.3 (Analogue) V - 2.271 x 2.19 x 0.275mm
RS Stock No. 660-4409
Mfr. Part No.PCM1803ADB
$5.36
Each
units
Delta Sigma 2 24 bit 96ksps Single Ended Surface Mount SSOP 20 - Serial - 5 V - 7.2 x 5.3 x 1.95mm
RS Stock No. 426-998
Mfr. Part No.AD1871YRSZ
$13.12
Each
units
Delta Sigma 2 24 bit 96ksps Differential, Single Ended Surface Mount SSOP 28 - Serial - 5 V - 10.2 x 5.3 x 1.75mm
Related Products
The dsPIC33F Digital Signal Controllers offer the performance ...
Description:
The dsPIC33F Digital Signal Controllers offer the performance of a DSP with the simplicity of an MCU. The 40MIPS dsPIC33F core is designed to execute digital filter algorithms, high-speed precision digital control loops and digital audio and speech processing.dsPIC33F DSCs ...
A resolver-to-digital or synchro-to-digital converter is a transducer ...
Description:
A resolver-to-digital or synchro-to-digital converter is a transducer that converts the angular position and/or velocity of a rotating shaft to a digital output signal. They deliver signals proportional to the sine and/or cosine of the shaft angle and/or velocity.
This Quad Sample-and-Hold amplifier comprises of four internal ...
Description:
This Quad Sample-and-Hold amplifier comprises of four internal buffer amplifiers and hold capacitors, and is suitable for a broad range of Sample-and-Hold applications. Economically designed, this device is typically used in signal processing systems, medical instrumentation and test equipment.
This Quad Sample-and-Hold amplifier comprises of four internal ...
Description:
This Quad Sample-and-Hold amplifier comprises of four internal buffer amplifiers and hold capacitors, and is suitable for a broad range of Sample-and-Hold applications. Economically designed, this device is typically used in signal processing systems, medical instrumentation and test equipment.