Bearing Heaters

Bearing heaters are used to quickly and evenly increase the temperature of bearings via induction heating, which makes it easier to mount them onto a shaft. Most bearing heaters come in 230V and 110V versions.

 

What are bearing heaters used for?

Bearing heaters form part of the tools suite used when repairing or building power transmissions. They make it possible to install bearings without having to execute force using hand tools, which can cause damage.


You can also use bearing heaters to heat other components, like gears, pulleys, bushings and shrink rings, as long as the heated parts form a closed electrical circuit. 

 

Types of bearing heaters

Induction coil bearing heaters and portable bearing induction heaters are the main types available.

 

Coil bearing heaters distribute heat evenly onto bearings with an interference fit mounting. The attached coil is on the outside of the heater component, resulting in reduced heating periods and efficient energy consumption.

 

Portable induction heaters are lightweight, quiet and do not magnetise components. These heaters are suitable for bearings of up to 4.5kg.


...
Read more Read less

Filters

Viewing 1 - 4 of 4 products
Results per page
Description Price Supply Voltage Maximum Bore Size Minimum Bore Size
RS Stock No. 497-9584
Mfr. Part No.TIH030M 230V
BrandSKF
$3,959.19
Each
units
230V ac 300mm 20mm
RS Stock No. 732-4726
Mfr. Part No.729659 C
BrandSKF
$1,352.92
Each
units
230V ac 100mm -
RS Stock No. 680-8018
Mfr. Part No.TIH030M/110V
BrandSKF
$4,450.78
Each
units
110V ac 300mm 20mm
RS Stock No. 845-9564
Mfr. Part No.TIH100M 230V
BrandSKF
$6,615.26
Each
units
200 → 240V 400mm 20mm
Related Products
Introducing the Compact convection heater of temperature classes ...
Description:
Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and ...
The Schneider Electric is an enclosure heater that ...
Description:
The Schneider Electric is an enclosure heater that belongs to the ClimaSys CR series. This is an ultra-thin resistant heater for prevention of formation of condensation due to low temperature. The mounting dimensions of this heater are 1.6mm depth, 250mm ...
Stego high performance cartridge heaters prevent the formation ...
Description:
Stego high performance cartridge heaters prevent the formation of condensation and provide an evenly distributed interior air temperature in enclosures. Heating element: high performance cartridgeOverheat protection: built-in temperature limiterHeater body: die-cast aluminum, glass bead finishConnection: 3-pole ...
The CR/CS series of compact high performance fan ...
Description:
The CR/CS series of compact high performance fan heaters prevent formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic enclosure provides double insulation and acts as protection against contact. ...