Pneumatic cylinder switches are used as part of the control system for pneumatic equipment. Pneumatic equipment utilises highly pressured condensed air to produce movement in mechanical devices. The devices used to switch pneumatic cylinders are reed switches These operate using a magnetic field, opening or closing when a magnet is applied, or vice versa.
What are pneumatic cylinder switches used for?
Though different types of pneumatic cylinder switches operate differently, they all serve the same purpose, which is to allow pneumatic cylinders to be integrated into an automated system. These switches detect the position of the cylinder and send a signal to the control system.
Types of pneumatic cylinder switches
There are many different types of pneumatic cylinder switch, including actuators, pneumatic relays, solid state and reed switches. Some types come with an LED (light emitting diode) indicator. The type of switch may affect the maximum operating temperature, the voltage rating, and the voltage drop, so it should be chosen according to the requirements of the equipment.
Size 05, 1 CRJ Series Rotary Actuator, Size 10 to 200 MSQ Series Rotary Actuator, Size 10 to 40 CDRQ2 Series Rotary Actuator, Size 10 to 40 CDRQ2X Series Rotary Actuator, Size 10 to 50 MSQX Series Rotary Actuator, Size 10 to 50 MSZ Series Rotary Actuator, Size 32 to 63 MHT2 Series Rotary Actuator
Size 05, 1 CRJ Series Rotary Actuator, Size 1, 7, 10 to 200 MSQ Series Rotary Actuator, Size 10 to 40 CDRQ2 Series Rotary Actuator, Size 10 to 40 CDRQ2X Series Rotary Actuator, Size 10 to 50 MSQX Series Rotary Actuator, Size 10 to 50 MSZ Series Rotary Actuator
Size 05, 1 CRJ Series Rotary Actuator, Size 1, 7, 10 to 200 MSQ Series Rotary Actuator, Size 10 to 40 CDRQ2 Series Rotary Actuator, Size 10 to 40 CDRQ2X Series Rotary Actuator, Size 10 to 50 MSQX Series Rotary Actuator, Size 10 to 50 MSZ Series Rotary Actuator
Description:
Sensor boxes SRBE are used for electrical feedback
and control of the position of process valves actuated using pneumatic quarter turn actuators They are suitable for use in potentially explosive environments. They can be mounted quickly and easily on quarter ...
Description:
SRBG sensor boxes are the compact solution when
it comes to electrical feedback signals and monitoring the position of process valves which are actuated with pneumatic quarter turn actuators They can be mounted directly without other accessories on quarter turn ...
Description:
Position indicator SASF for sensor boxes SRBG For
mounting on drive shaft of standard actuators to VDI/VDE 3845Four fixed actuating lugs offset by 90°For clockwise and anticlockwise rotating actuators with 90° and 180° rotation Made from conductive plastic material, which ...
Description:
Solid state auto switches, D-M9N series Range of
static detectors with integral fittings Easily fitted to the cylinder groove on C55, MY1 series, etcReduced load current Extra-flexible wire For relays, printed circuits, programmable controllers Note Cable length: 0.5m. M8 connector ...
