Pneumatic Pressure Regulator Function Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic pressure regulator function fittings being one example.

What are pneumatic pressure regulator function fittings used for?

Pneumatic pressure regulator function fittings are used to ensure the pressure in the system stays within the desired range. If the pressure gets too high or too low the fittings are activated and the flow is adjusted to prevent an over or under pressure.

Types of pneumatic pressure regulator function fittings

Pneumatic pressure regulator function fittings come in a variety of diameters, fits, grades and pressure ranges.


...
Read more Read less

Filters

Viewing 1 - 12 of 12 products
Results per page
Description Price Manufacturer Series Inlet Port Type Threaded Inlet Port Tube Inlet Port Outlet Port Type Tube Outlet Port Maximum Input Pressure Minimum Outlet Pressure Threaded Inlet Port Thread Standard Maximum Outlet Pressure Threaded Inlet Port Gender Threaded Inlet Port Size
RS Stock No. 398-5544
Mfr. Part No.7300 08 13
BrandLegris
$108.31
Each
units
7300 Threaded G 1/4 Male - Tube 8mm 16bar - G - Male 1/4 in
RS Stock No. 748-5578
Mfr. Part No.AW10-M5
BrandSMC
$41.67
Each
units
AW - - - - - - - - - - -
RS Stock No. 398-5538
Mfr. Part No.7300 08 10
BrandLegris
$74.57
Each
units
7300 Threaded G 1/8 Male - Tube 8mm 16bar - G - Male 1/8 in
RS Stock No. 398-5522
Mfr. Part No.7300 06 13
BrandLegris
$65.72
Each
units
7300 Threaded G 1/4 Male - Tube 6mm 16bar - G - Male 1/4 in
RS Stock No. 398-5500
Mfr. Part No.7300 04 10
BrandLegris
$70.49
Each
units
7300 Threaded G 1/8 Male - Tube 4mm 16bar - G - Male 1/8 in
RS Stock No. 398-5516
Mfr. Part No.7300 06 10
BrandLegris
$84.54
Each
units
7300 Threaded G 1/8 Male - Tube 6mm 16bar - G - Male 1/8 in
New
RS Stock No. 203-8671
Mfr. Part No.LR-1/8-QS-6
BrandFesto
$91.23
Each
units
LR-1/8-QS-6 Threaded - G1/8 Threaded 6mm - - - - - 1/8:
RS Stock No. 387-4854
Mfr. Part No.016H6703
BrandEliwell
$88.70
Each
units
016H Threaded G 1/4 Male - - - - 0bar G 7bar Male 1/4 in
New
RS Stock No. 203-8564
Mfr. Part No.LR-1/8-QS-8
BrandFesto
$96.74
Each
units
LR-1/8-QS-8 Threaded - 8mm Threaded 8mm - - - - - 1/8:
New
RS Stock No. 203-8670
Mfr. Part No.LR-1/4-QS-6
BrandFesto
$98.94
Each
units
LR-1/4-QS-6 Threaded - 6mm Threaded 6mm - - - - - 1/4
New
RS Stock No. 203-8539
Mfr. Part No.LR-1/8-QS-4
BrandFesto
$84.87
Each
units
LR-1/8-QS-4 Threaded - G1/8 Threaded 4mm - - - - - 1/8:
New
RS Stock No. 203-8520
Mfr. Part No.LR-1/4-QS-8
BrandFesto
$105.30
Each
units
LR-1/4-QS-8 Threaded - 8mm Threaded 8mm - - - - - 1/4
Related Products
FESTO Flow Regulators GRLZ Series One-way flow control ...
Description:
FESTO Flow Regulators GRLZ Series One-way flow control or flow control regulator valves, regulate flow rates for the advance or return strokes of cylinders Restriction of the flow rate of compressed air in exhaust air or supply air direction is ...
Speed Controller - Metal Body Elbow Minimises installation ...
Description:
Speed Controller - Metal Body Elbow Minimises installation time and cost Speed may be accurately controlled even at low velocity Constant speed easily achieved Retaining function prevents accidental loss of needle Meter out only free flow return Tapered port threads ...
In-line Regulator In-line flow regulators providing unidirectional flow ...
Description:
In-line Regulator In-line flow regulators providing unidirectional flow control whether metering-in or metering-out air to or from a pneumatic cylinder Uni-directional flow regulation Push-in fittings for both in and out connections Supplied with two joining clips for linking more than ...
Dual Flow Controller Dual flow controller incorporating two ...
Description:
Dual Flow Controller Dual flow controller incorporating two flow control valves and two check valves Combines meter - in and meter - out functions into a single body Compact design and reduced pipework Ideal for high precision control of miniature ...