Motorised & Actuated Valves

Motorised valves are used to control water flow from the boiler to heating and hot water circuits, and is operated electrically. Types of motorised valves:A motorised valve can be a 2 port valve or a 3 port valve.2-port - The valve has 2 pipe connections (ports) and permits or blocks flow between the ports depending on whether it is actuated or not. Flow is permitted when the valve is actuated and blocked in its resting state.3-port - The valve has 3 pipe connections, in a T formation. The centre leg of the T is the inlet and the two short arms are the outlets, usually referred to as ports A and B. Actuation controls whether the flow from the inlet passes to the A or B port. In the resting state flow is to the B port (usually the hot water circuit).Actuated valvesActuated valves are the mechanism for opening and closing the valve, an actuator requires a control signal and a source of energy. Actuators may be only to open and close the valve, or may allow intermediate positioning; some valve actuators include switches or other ways to remotely indicate the position of the valve.Valves and Actuators are two completely separate components; however, they do work together to accomplish a common task.

...
Read more Read less

Filters

Viewing 1 - 20 of 50 products
Results per page
Description Price Compatible Pipe Size Number of Ports Maximum Working Pressure Supply Voltage Body Material
RS Stock No. 805-6042
BrandRS PRO
$118.03
Each
units
1/4 in, 1/8 in 5 100 psi - Extruded Aluminium Alloy
RS Stock No. 799-8755
BrandRS PRO
$387.63
Each
units
1/2in 3 1000 psi - Stainless Steel
RS Stock No. 812-5236
BrandRS PRO
$24.90
Each
units
1/2in 2 40 bar - Brass
RS Stock No. 799-8838
BrandRS PRO
$767.18
Each
units
3/4in 3 1000 psi 24 V ac/dc, 110 V, 220 V Stainless Steel
RS Stock No. 799-8771
BrandRS PRO
$494.98
Each
units
3/4in 3 1000 psi - Stainless Steel
RS Stock No. 805-6048
BrandRS PRO
$113.72
Each
units
1/4 in, 1/8 in 2 100 psi - Extruded Aluminium Alloy
RS Stock No. 812-5249
BrandRS PRO
$195.16
Each
units
2in 2 40 bar - Brass
RS Stock No. 799-8799
BrandRS PRO
$374.84
Each
units
2in - - - EPDM Liner
RS Stock No. 812-5233
BrandRS PRO
$49.31
Each
units
1in 1 40 bar - Brass
RS Stock No. 799-8806
BrandRS PRO
$463.58
Each
units
2-1/2in - - - Nitrile Liner
RS Stock No. 805-6036
BrandRS PRO
$86.55
Each
units
1/8in 5 10 bar - Extruded Aluminium Alloy
RS Stock No. 122-5831
BrandRS PRO
$503.63
Each
units
1in 3 1000 kPa - Brass
RS Stock No. 799-8777
BrandRS PRO
$466.27
Each
units
1/2in 3 1000 psi - Stainless Steel
RS Stock No. 805-6054
BrandRS PRO
$169.49
Each
units
1/4 in, 1/8 in 3 100 psi - Extruded Aluminium Alloy
RS Stock No. 799-8768
BrandRS PRO
$521.43
Each
units
1in 3 1000 psi - Stainless Steel
RS Stock No. 799-8803
BrandRS PRO
$483.63
Each
units
2-1/2in - - - EPDM Liner
RS Stock No. 799-8759
BrandRS PRO
$449.69
Each
units
3/4in 3 1000 psi - Stainless Steel
RS Stock No. 805-6058
BrandRS PRO
$200.08
Each
units
1/4 in, 1/8 in 2 100 psi - Extruded Aluminium Alloy
RS Stock No. 799-8816
BrandRS PRO
$457.55
Each
units
2in - - - Nitrile Liner
RS Stock No. 799-8796
BrandRS PRO
$1,408.28
Each
units
2in 3 800 psi - Stainless Steel
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM seals Creep resistant bearings Reinforced nylon handle Reduced risk of contamination by top and bottom seals Operating temperature -10ºC to +120°CWorking pressure 09 bar to 10 bar Polished disc.
High quality lubricated packing Non rising stem Can ...
Description:
High quality lubricated packing Non rising stem Can be re-packed under pressure Solid brass wedgeBSI Kitemark approved: License no KM-06045.Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356.
Hot forged brass gate valve and DZR brass ...
Description:
Hot forged brass gate valve and DZR brass gate valve with forged brass screwed bonnet, non rising stem and solid wedge disc Manufactured to BS5154/B - PN 20BS1 kitemark approved: License no KM-06254.
A range of bronze globe valves, individually hydrostatically ...
Description:
A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 352 bar Rising Stem Threaded bonnet Renewable disc which is suitable for steam service Bronze trim with glass filled ...