Breadboards

A breadboard is a solderless plugboard that is reusable and used for prototyping in electronics. The fact that it is solderless allows it to be used for creating temporary prototypes and circuit designs.

Layout of a Breadboard
Terminal strips are the main areas which hold most of the electronic components. The metal strips at the bottom of the breadboard have clips which allow you to hold a component in place once inserted into the holes. The wire or component is then electrically connected to anything else that is in that row.
Power rails (also known as bus strips) are metal strips that run in the opposite direction to the terminal strips giving you easy access to power wherever it is required in the circuit.
The ravine in the centre of a breadboard is used for DIP integrated circuits.

Uses of breadboards
Due to a breadboards prototyping capabilities, they are popular with students who use them to create simple or complex circuits.
Manufacturers also use breadboards to test out new parts so that they do not have to solder connections each time they test a new design. It gives them the ability to build, test then analyse the results.

...
Read more Read less

Filters

Viewing 1 - 20 of 58 products
Results per page
Description Price Type Length Width Height Dimensions Input Voltage DIP Capacity
RS Stock No. 102-9147
BrandRS PRO
$21.23
Each
units
Prototyping Board 80mm 60mm 10mm 80 x 60 x 10mm - -
RS Stock No. 835-2716
BrandRS PRO
$43.89
Each
units
Prototyping Solderless Breadboard 83mm 147mm 19mm 83 x 147 x 19mm - -
RS Stock No. 102-9169
BrandRS PRO
$75.21
Each
units
Prototyping Board 240mm 195mm 21mm 240 x 195 x 21mm - -
RS Stock No. 835-2725
BrandRS PRO
$68.32
Each
units
Prototyping Solderless Breadboard 266mm 168mm 24mm 266 x 168 x 24mm - -
RS Stock No. 210-4542
BrandRS PRO
$41.37
Each
units
Prototyping Board 201mm 64mm 18.5mm 201 x 64 x 18.5mm - -
RS Stock No. 159-6209
BrandRS PRO
$51.77
Each
units
Prototyping Board 203.3mm 194.31mm 1.6mm 203.3 x 194.31 x 1.6mm - -
RS Stock No. 835-2712
BrandRS PRO
$16.13
Each
units
Power Block 81mm 30mm 19mm 81 x 30 x 19mm - -
RS Stock No. 159-6192
BrandRS PRO
$56.90
Each
units
Prototyping Board 114.3mm 156.21mm 1.6mm 114.3 x 156.21 x 1.6mm - -
RS Stock No. 100-4097
Mfr. Part No.01-0040
$40.12
Each
units
Prototyping Board 95.1mm 454.6mm - - - -
RS Stock No. 124-5499
Mfr. Part No.2890
$11.88
Each
units
Prototyping Board 50.9mm 47mm 1.6mm 50.9 x 47 x 1.6mm 3.3 V -
RS Stock No. 897-1632
Mfr. Part No.RE942-S1
$4.62
Each
units
Solderable Breadboard With Adaption Circuit Board 31.75mm 24.76mm 1.5mm 31.75 x 24.76 x 1.5mm - -
RS Stock No. 124-5457
Mfr. Part No.1377
$9.31
Each
units
SMT Breakout PCB - - - - - 48
RS Stock No. 897-1666
Mfr. Part No.RE944-S3
$9.27
Each
units
Solderable Breadboard With Adaption Circuit Board 73.02mm 46.99mm 1.5mm 73.02 x 46.99 x 1.5mm - -
RS Stock No. 634-7822
Mfr. Part No.SAD-11
BrandSunhayato
$44.83
Each
units
Prototyping Board 83mm 147mm 16mm 83 x 147 x 16mm - -
RS Stock No. 634-8869
Mfr. Part No.SRH-32
BrandSunhayato
$56.03
Each
units
Prototyping Board 190mm 168mm 24mm 190 x 168 x 24mm - -
RS Stock No. 124-5515
Mfr. Part No.2884
$7.76
Each
units
Prototyping Board 50.9mm 22.9mm 1.6mm 50.9 x 22.9 x 1.6mm 3.3 V 32
RS Stock No. 634-8875
Mfr. Part No.SRH-5X2
BrandSunhayato
$9.71
Each
units
Prototyping Board 13mm 173mm 9mm 13 x 173 x 9mm - -
RS Stock No. 453-8824
Mfr. Part No.SAD-01
BrandSunhayato
$30.52
Each
units
Prototyping Board 83mm 117mm 9mm 83 x 117 x 9mm - -
RS Stock No. 897-1626
Mfr. Part No.RE941-S1
$3.54
Each
units
Solderable Breadboard With Adaption Circuit Board 31.75mm 17.14mm 1.5mm 31.75 x 17.14 x 1.5mm - -
RS Stock No. 434-021
Mfr. Part No.01-3943
$63.99
Each
units
Prototyping Board 203mm 114mm 1.6mm 203 x 114 x 1.6mm - -
Related Products
Breadboard jumper wire kit for easy and accurate ...
Description:
Breadboard jumper wire kit for easy and accurate wiringSKS-290 uses high-grade jumper wires with nickel pins on both ends, allowing for easy bendingSKS-350 features phosphor bronze, nickel-plated PVC cladding, supporting inch pitches and direct contact with board.
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
A range of low density boards designed for ...
Description:
A range of low density boards designed for wiring integrated circuits.The 0 V and Vdc power supply lines are repeated on the component side of the board, increasing the distribution capacity.The contacts are replaced by individual pads designed to take ...
3M 300 series solderless breadboards incorporate state-of-the-art techniques ...
Description:
3M 300 series solderless breadboards incorporate state-of-the-art techniques to yield a circuit building system with unparalleled flexibility and reliability. A voltage distribution system is integrated with the basic component breadboard matrix. 5-way binding posts provide the interface for connections from ...