Ceiling Roses

A ceiling rose is an essential accessory for any lamp design, and it is the most efficient ways to illuminate large rooms and areas. A rose is a fixing point for a lamp, ensuring it is flat against the mounting surface fixed to a ceiling. Wires within the lighting circuit are brought into the rose and connected through the terminals, bringing convenience and versatility for lighting installations.

...
Read more Read less

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Number of Terminals Diameter Depth Cable Cross-Sectional Area Colour Current Rating Earth Bonding Terminal Maximum Operating Temperature Minimum Operating Temperature Operating Temperature Range Voltage Rating
RS Stock No. 473-0907
Mfr. Part No.1161 WHI
$6.54
Each
units
4 84mm 34 mm 2.5mm² White 6 A Yes +40°C -5°C -5 → +40°C 250 V ac
RS Stock No. 787-1256
Mfr. Part No.K3240WHI
$27.18
Each
units
3 75mm 44 mm 0.75 mm², 1 mm², 1.5 mm², 2.5 mm², 4 mm² White 6 A Yes +40°C -5°C -5 → +40°C 250 V ac
RS Stock No. 787-1250
Mfr. Part No.K4240WHR
$20.39
Each
units
4 75mm 44 mm 0.75 mm², 1 mm², 1.5 mm², 2.5 mm², 4 mm² White 6 A Yes +40°C -5°C -5 → +40°C 250 V ac
Related Products
Four tunnel type terminals to allow for loop-in, ...
Description:
Four tunnel type terminals to allow for loop-in, which can accept up to 3 x 2.5mm cableTransparent base aids installationCan be mounted onto standard conduit boxes.
Incorporates a lampholder (1170 WHI), heat resisting PVC ...
Description:
Incorporates a lampholder (1170 WHI), heat resisting PVC insulated and sheathed flexible 0.75mm² two core circular cable complying with BS 6500: 2000 (Table 29) and a ceiling rose fitted with line, neutral, loop-in and earth terminals (1161 WHI).This assembly will ...
Twin tungsten halogen lampholder designed for use with ...
Description:
Twin tungsten halogen lampholder designed for use with a 500W R7s fitting (118mm). Rated at 6A, 250V. Screw fixingWires: Cu, nickel plated0.75 square mm, with ferruleInsulation: PTFECable length: 220 mm.
This halogen lampholder is designed for use with ...
Description:
This halogen lampholder is designed for use with a 1000W R7s fitting, rated at 10A, 250V. • 10/250 nominal rating• Fixing holes for screws M3• 15.7g light weight• Snap-fit • Screw mounted• 10A current rating• 250V voltage rating.