Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 41 - 47 of 47 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Series Voltage Rating
RS Stock No. 213-4846
Mfr. Part No.877000KA100000
BrandSloan
$17.76
Each
units
Panel Mount LED Wedge - 11.2mm - - - - - - -
RS Stock No. 903-9319
Mfr. Part No.14-031.006
BrandEAO
$14.07
Each
units
Panel Mount - T5.5 Quick Connect, Solder 30mm 43.5 mm - 22.5mm - Panel Mount 14 Series -
RS Stock No. 387-5396
Mfr. Part No.DTMU/MES/4
BrandTranilamp
$10.15
Each
units
Panel Mount - E10 Cable Clamp 35mm 50 mm - - - Panel Mount DTMU -
RS Stock No. 237-0553
Mfr. Part No.A105000AAD
$4.50
Each
units
Panel Mount LED Screw In Wire Leads 10mm 16.9 mm 5 mm 8mm 7mm - - -
RS Stock No. 842-2824
Mfr. Part No.SOP-E12-150SS
BrandBanner
$23.69
Each
units
- LED - - - 150 mm - - - - - -
RS Stock No. 237-0575
Mfr. Part No.A1050OAAAD
$6.16
Each
units
Panel Mount LED Screw In Wire Leads 10mm 17.9 mm 5 mm 8mm 7mm - - -
RS Stock No. 842-2818
Mfr. Part No.SA-E12M30
BrandBanner
$21.60
Each
units
- LED - - - - - - - - - -
Related Products
Brought to you under the trusted RS Pro, ...
Description:
Brought to you under the trusted RS Pro, these LED indicators have diffused epoxy lenses and a chrome bezel. The body features convenient solder lug termination for a quick and easy connection. RS Pro LED indicators give a high level ...
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
Transformer lampholders designed to provide an output for ...
Description:
Transformer lampholders designed to provide an output for a 6 V MES filament lamp which is isolated from the mains supply. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are ...
877 Series,The nickel plated brass body is supplied ...
Description:
877 Series,The nickel plated brass body is supplied with a solder tag, fixing nut and washer. Electrical connections are made via two insulated solder terminals.The caps construction is a nickel plated brass screw with polycarbonate transparent fresnel lens. The lens ...