Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 1 - 20 of 47 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Series Voltage Rating
RS Stock No. 589-783
BrandRS PRO
$2.914
Each (In a Pack of 5)
units
Panel Mount - BA9 - 17.7mm 19 mm - 14.5mm - Panel Mount PE12 150 V
RS Stock No. 589-777
BrandRS PRO
$2.028
Each (In a Pack of 5)
units
Panel Mount - E10 - 17.7mm 13.25 mm - 14.5mm - Panel Mount PE12 150 V
RS Stock No. 237-0525
Mfr. Part No.A1048OAAAC
$3.78
Each
units
Panel Mount LED Screw In Wire Leads 9.5mm 15.5 mm 5 mm 8mm 5.5mm - - -
RS Stock No. 171-2596
Mfr. Part No.OR1206
BrandOrbitec
$1.005
Each (In a Pack of 10)
units
PCB Mount - BA9s PCB Pin - - - - - PCB Mount 0664 -
RS Stock No. 168-3918
Mfr. Part No.2910F-42
$0.666
Each (In a Bag of 100)
units
- - - - - - - - - - - -
RS Stock No. 705-9920
Mfr. Part No.2910F-42
$0.906
Each (In a Pack of 10)
units
- - - - - - - - - - - -
RS Stock No. 237-0496
Mfr. Part No.A104800AAB
$3.20
Each
units
Panel Mount LED Screw In Wire Leads 9.5mm 14.5 mm 5 mm 8mm 6.3mm - - -
RS Stock No. 206-536
BrandRS PRO
$0.732
Each (In a Pack of 5)
units
- LED BA9s, E10 - 10mm 42 mm 10 mm - - - - -
RS Stock No. 565-147
Mfr. Part No.T0063AOFAD
$6.01
Each
units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - -
RS Stock No. 213-4717
Mfr. Part No.102RSJ00000000
BrandSloan
$15.30
Each
units
Panel Mount LED Midget Flange Solder Tag 8.2mm - - - - - - -
RS Stock No. 561-713
Mfr. Part No.TMU/120/4
BrandTranilamp
$22.53
Each
units
Panel Mount - Screw In Cable Clamp 35mm 62 mm - - - Panel Mount TMU -
RS Stock No. 438-9515
BrandRS PRO
$8.72
Each
units
- - BA9 Solder Tag 10.3mm 20 mm - - - - - -
RS Stock No. 237-0480
Mfr. Part No.A104700AAC
$7.13
Each
units
Panel Mount LED - Wire Leads 7.6mm 13.9 mm 3 mm 6.3mm 6.3mm - - -
RS Stock No. 237-0519
Mfr. Part No.A104800AAC
$3.25
Each
units
Panel Mount LED Screw In Wire Leads 9.5mm 14.5 mm 5 mm 8 5.5mm - - -
RS Stock No. 171-2580
Mfr. Part No.OR1204
BrandOrbitec
$0.708
Each (In a Pack of 10)
units
PCB Mount - E10 PCB Pin - - - - - PCB Mount 0666 -
RS Stock No. 387-5380
Mfr. Part No.LMU/MES/4
BrandTranilamp
$9.16
Each
units
Panel Mount - E10 Cable Clamp 35mm 42 mm - - - Panel Mount LMU -
RS Stock No. 811-715
BrandRS PRO
$2.174
Each (In a Pack of 5)
units
PCB Mount - Wedge Solder Tag 5mm 14 mm T1 - 1.5mm - - -
RS Stock No. 811-642
BrandRS PRO
$1.342
Each (In a Pack of 5)
units
PCB Mount - Wedge PCB Pin 10mm 14.5 mm T3 1/4 - - - - -
RS Stock No. 585-898
Mfr. Part No.MTMU/240/4
BrandTranilamp
$35.46
Each
units
Panel Mount - E10 Cable Clamp 35mm 67 mm - - - Panel Mount MTMU 240 V
RS Stock No. 237-0531
Mfr. Part No.A1048OAAAD
$9.40
Each
units
Panel Mount LED Screw In Wire Leads 9.5mm 15.5 mm 5 mm 8mm 5.5mm - - -
Related Products
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
Transformer lampholders designed to provide an output for ...
Description:
Transformer lampholders designed to provide an output for a 6 V MES filament lamp which is isolated from the mains supply. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are ...
877 Series,The nickel plated brass body is supplied ...
Description:
877 Series,The nickel plated brass body is supplied with a solder tag, fixing nut and washer. Electrical connections are made via two insulated solder terminals.The caps construction is a nickel plated brass screw with polycarbonate transparent fresnel lens. The lens ...
Direct supply lampholders which can only be used ...
Description:
Direct supply lampholders which can only be used with appropriately rated filament lamps at the voltage listed. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are designed to be used ...