Extractor Fans

Extractor fans also known as wall fans are designed to remove moisture, fumes and unwanted odours from the air to improve the air quality. In domestic and commercial properties it is important to reduce condensation and provide ventilation in the kitchen, bathroom, shower room, wet room and laundry room. Nowadays it is a legal requirement to have an extractor fan in new builds.


The airflow of a fan is in cubic feet per hour (m³/h) and is an important factor when deciding on which type of fan you require. A large variety of wall fans is available in a range of styles and colours to suit all room sizes and locations. Some of these ventilation fans can be very nosy therefore silent extractor fans are worth considering if noise is an issue. Most fans come with a mounting kit, pull cord or automatic shutter options and some have special features such as humidistat, timers and remote controls


Basic types of fans for extraction, intake and ventilation are:


  • Axial fans – most common type, usually wall mounted to internal walls and depending on the cavity depth these wall mounted fans require ducting to reach the exterior wall

  • Centrifugal extractor fans - which are ceiling mounted. General found in commercial and industrial environments that need elongated ducting and can be nosy

  • Inline extractor fan – can be axial or centrifugal but they are not installed on walls and ceilings but found in the loft space above a ceiling

Where to place fans?


  • Kitchen – removes cooking smells, steam and traps grease therefore providing healthier environment

  • Bathroom – to provide ventilation and reduce condensation from the steam after a hot shower or bath. This prevents damp and mouldy patches which can cause health problems as unventilated conditions are ideal for bacteria to live. Also removes unwanted bad smells after using the toilet

  • Shower rooms or wet rooms – bathroom ceiling extractor fans remove moisture from showering

  • Window – some window fans can be mounted on the window but a special kit is required for these window vents

...
Read more Read less

Filters

Viewing 41 - 60 of 167 products
Results per page
Description Price Function Air Flow Noise Level Mounting Face Diameter Face Dimensions Depth Face Height Face Width Configuration Series Special Features Termination Type
RS Stock No. 2552277158
Mfr. Part No.TD-500/150SIL
BrandFantech
$627.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277167
Mfr. Part No.MV112E
BrandFantech
$594.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277159
Mfr. Part No.RP304
BrandFantech
$584.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277168
Mfr. Part No.RP252
BrandFantech
$560.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277444
Mfr. Part No.DWK150
BrandFantech
$223.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277507
Mfr. Part No.SILENT-100S-W
BrandFantech
$103.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277416
Mfr. Part No.SILDES300CRZ3C-S
BrandFantech
$340.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277160
Mfr. Part No.HV-300AE
BrandFantech
$622.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277177
Mfr. Part No.RP204
BrandFantech
$480.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277116
Mfr. Part No.PFA304EK700
BrandFantech
$916.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277100
Mfr. Part No.PFA306ED
BrandFantech
$969.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277431
Mfr. Part No.EDM-200C
BrandFantech
$257.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277446
Mfr. Part No.HCM-150N
BrandFantech
$230.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277401
Mfr. Part No.SILDES300CHZ3C-S
BrandFantech
$410.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277077
Mfr. Part No.MV354E
BrandFantech
$1,173.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277074
Mfr. Part No.MV356E
BrandFantech
$1,261.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277155
Mfr. Part No.TD-800/200SIL
BrandFantech
$655.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277175
Mfr. Part No.HV-230CAP
BrandFantech
$476.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277435
Mfr. Part No.SILDES100CHZ3C-S
BrandFantech
$249.00
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277432
Mfr. Part No.EDM-300C
BrandFantech
$257.00
Each
units
- - - - - - - - - - - - -
Related Products
The ebm-papst single inlet centrifugal fan has an ...
Description:
The ebm-papst single inlet centrifugal fan has an airflow of 390m³/h (for 50Hz) at a fan speed of 1800rpm and has a supply voltage rating of 230VAC The external rotor motor is integrated within the impeller, therefore reducing installation dimensions. ...
RS PRO USB mini fan for desktops This ...
Description:
RS PRO USB mini fan for desktops This fan is great for hot and stuffy environments as it replaces the hot air with cooler air, therefore, helping the individual to stay cool. This fan can be powered from any USB ...
The Xpelair XID series in-line mounting centrifugal duct ...
Description:
The Xpelair XID series in-line mounting centrifugal duct fan has an airflow rate of 36m³/h and a duct diameter of 100mm It has a supply voltage rating ranging between 220V and 240V. Engineered for trouble-free operation, this product is supplied ...
Vent-Axia Powerflow In-Line Duct Fans (ACP) Powerflow models ...
Description:
Vent-Axia Powerflow In-Line Duct Fans (ACP) Powerflow models provide a compact yet versatile range designed with the installer in mind, combining the acoustic benefits of a tough plastic casing with the pressure characteristics of a centrifugal fanPowerflow has 50-80mm long ...