Peltier Modules

Peltier modules use the Seebeck effect to create a heat flux between the junctions of two different types of materials. They can be used with both heating and cooling applications, although primarily used in a cooling process. These thermoelectric operate by the Peltier effect and have two sides, one brings heat from one side to the other, ensuring the other side gets cooler.
Applications
• Consumer products (portable coolers, AC units)
• Scientific devices
• Military
• Engineers
Features and Benefits
• No moving parts, so considerably less maintenance
• Almost perfect temperature control
• Flexible shape
• Long lasting

...
Read more Read less

Filters

Viewing 121 - 125 of 125 products
Results per page
Description Price Maximum Cooling Capacity Maximum Temperature Difference Maximum Current Maximum Voltage Active Area Active Area Length Active Area Thickness Active Area Width Diameter
RS Stock No. 174-3126
Mfr. Part No.APHC-161-12-08-S
BrandAdaptive
$62.22
Each
units
- - 8A - - - - - -
RS Stock No. 174-3132
Mfr. Part No.ET-127-10-13-H1
BrandAdaptive
$32.82
Each
units
- - - - 30 x 30mm 30mm 30mm - -
RS Stock No. 174-3125
Mfr. Part No.APHC-161-12-10-S
BrandAdaptive
$62.22
Each
units
- - 6A - - - - - -
RS Stock No. 490-1272
Mfr. Part No.ET-031-10-20-RS
BrandAdaptive
$34.17
Each
units
5.8W +75K 2.5A 3.8V 15 x 15mm 15mm 4.3mm 15mm -
RS Stock No. 174-3131
Mfr. Part No.ET-063-10-13-S-H1
BrandAdaptive
$28.46
Each
units
- - - - 30 x 15mm 30mm 15mm - -
Related Products
From Laird Technologies, these SealTEC™ thermoelectric coolers provide ...
Description:
From Laird Technologies, these SealTEC™ thermoelectric coolers provide maximum protection from water condensation when equipment is working at or below the 'dew point' or in humid conditions. The thermoelectric coolers prevent feature a SealTEC™ barrier that prevents water or gases ...
The Thermoelectric modules utilise the Peltier phenomenon principle ...
Description:
The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of WattsMax hot side temperature Th = 90°C for best long term performanceModules can be bonded using ...
The Thermoelectric modules utilise the Peltier phenomenon principle ...
Description:
The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of WattsMax hot side temperature Th = 90°C for best long term performanceModules can be bonded using ...
The Thermoelectric modules utilise the Peltier phenomenon principle ...
Description:
The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of WattsMax hot side temperature Th = 90°C for best long term performanceModules can be bonded using ...