Bolted Tag Fuses

Bolted tag fuses are a cylindrical type of fuse fitted with brackets at either end to bolt it onto a fuse holder. Fuses are devices designed for use in circuit protection. They provide a weak link, meaning that they break when a fault such as an overcurrent or short circuit is detected, as the metal strip within them heats up and then melts. This stops the flow of current, preventing the circuit from further damage.

What are bolted tag fuses used for?

Bolted tag fuses can be used in many general industrial applications, such as in different types of electrical equipment and wiring systems used throughout buildings. They are often used in low voltage circuits. They also work well in high-density mounting applications.

Types of bolted tag fuses

Bolted tag fuses mainly vary by their size and current rating, and these factors can differ quite widely. They can also differ by the fuse speed, voltage rating and their tag orientation.


...
Read more Read less

Filters

Viewing 641 - 646 of 646 products
Results per page
Description Price Current Rating Fuse Size Voltage Rating Fuse Standard Fixing Centres Application Category Tag Width Fuse Speed High Rupture Capacity Overall Length Body Diameter Body Length Body Width Body Height
RS Stock No. 182-1706
Mfr. Part No.63ET
$31.44
Each
units
- - - - - - - - - - - - - -
RS Stock No. 156-8989
Mfr. Part No.71FE
$74.50
Each
units
71A FE 660V ac BS 88, IEC 269-4 63.5mm - 12.7mm FF Yes 77mm 17.7mm - - 48mm
RS Stock No. 182-1605
Mfr. Part No.160LET
$30.72
Each
units
- - - - - - - - - - - - - -
RS Stock No. 178-1127
Mfr. Part No.V1006613
BrandMersen
$30.749
Each (In a Pack of 10)
units
63M80A A4 460 V dc, 690 V ac BS 88, IEC 60269 94mm gM 19.5mm - No 111mm 26.9mm - - 59.5mm
RS Stock No. 178-1051
Mfr. Part No.H226304
BrandMersen
$46.30
Each (In a Pack of 5)
units
200M315A A4X 240 V dc, 415 V ac BS 88, IEC 60269 94mm gM 19.5mm - No 111mm 41.9mm - - 76mm
RS Stock No. 182-1701
Mfr. Part No.40ET
$30.39
Each
units
- - - - - - - - - - - - - -
Related Products
These fuses are designed for : General purpose ...
Description:
These fuses are designed for : General purpose use protection (gG type) or motor protection (gM type) This fuse range insures an excellent current limitation for all overloads on a large range of applications. Their size cannot allow exchange by ...
Eatons Bussmann series® STD fuse links are specifically ...
Description:
Eatons Bussmann series® STD fuse links are specifically designed for street lighting applications with Q1 fusing purpose Good peak let-through current limitation1:1:6 Selective coordination ratio between minor and major fusegG characteristics for cable protection and general purpose applications.
Eatons Bussmann® series PJ31 J Type feeder pillar ...
Description:
Eatons Bussmann® series PJ31 J Type feeder pillar fuse links are designed to be used with wedge type fuse carriers on BS applications These fuse links will be used by Electrical Authorities in distribution pillars, open type substation boards, heavy ...
Breaking capacity 80kA at 415Vac and 40kA at ...
Description:
Breaking capacity 80kA at 415Vac and 40kA at 250Vdc (bolted connection types) (E1 type 16·5kA at 240Vac)Rated at 415Vac/250Vdc (bolted connection types) (E1 type 240Vac)Electricity Supply Authorities, Lloyd’s Register of Shipping Approvals and ASTA 20 certified