Non-Resettable Wire Ended Fuses

Non-resettable wire ended fuses are a type of single use circuit protection device that are can be soldered onto printed circuit boards or carriers. This category encompasses any type of single-use fuse that consist of a fuse body with two wires extended outside of the body.

How do non-resettable wire ended fuses work?

Non-resettable wire ended fuses form part of a circuit and allow an electrical current to flow through them. When a fault such as overcurrent or a short circuit is detected, the metal strip in the fuse body will melt, breaking the circuit and preventing damage. This type of fuse must be replaced after it has blown.

Types of non-resettable wire ended fuses

Non-resettable wire ended fuses differ broadly, mainly in their shape. The fuse body can be a short, fat cylinder or a longer, thinner one, and the wires may extend in parallel both from the same side of the fuse, or in opposite directions from either side of the fuse body. They also differ in their current and voltage rating, and the range of their operating temperature.


...
Read more Read less

Filters

Viewing 1 - 20 of 565 products
Results per page
Description Price Current Rating Lead Orientation Voltage Rating Fuse Speed Body Material Body Diameter Body Length Body Width Body Height Wire Length Wire Pitch Breaking Capacity at Maximum Voltage Rating Minimum Operating Temperature Maximum Operating Temperature
RS Stock No. 611-9346
BrandRS PRO
$1.087
Each (In a Pack of 10)
units
6.3A Radial 250V ac T Nylon 8.5mm - - 8mm 4.3mm 5.08mm 50 A -40°C +85°C
RS Stock No. 911-3552
BrandRS PRO
$0.52
Each (In a Pack of 10)
units
3.15A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 767-5162
BrandRS PRO
$0.224
Each (In a Pack of 10)
units
4A Radial 250V - Thermoplastic 8.35 - - 7.7mm 4.3 mm, 22 mm 5.08mm 40 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3565
BrandRS PRO
$0.511
Each (In a Pack of 10)
units
5A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 911-3540
BrandRS PRO
$0.511
Each (In a Pack of 10)
units
2A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 764-9551
BrandRS PRO
$0.471
Each (In a Pack of 10)
units
2A Axial 250V ac T Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac/125 V dc -55°C +125°C
RS Stock No. 911-3534
BrandRS PRO
$0.60
Each (In a Pack of 10)
units
1A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 767-5052
BrandRS PRO
$0.459
Each (In a Pack of 10)
units
3.15A Radial 250V T Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 764-9586
BrandRS PRO
$0.699
Each (In a Pack of 10)
units
2A Axial 250V ac FF Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3528
BrandRS PRO
$0.461
Each (In a Pack of 10)
units
500mA - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 764-9576
BrandRS PRO
$0.699
Each (In a Pack of 10)
units
500mA Axial 250V ac FF Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac -55°C +125°C
RS Stock No. 764-9605
BrandRS PRO
$0.699
Each (In a Pack of 10)
units
5A Axial 250V ac FF Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5131
BrandRS PRO
$0.817
Each (In a Pack of 10)
units
6.3A Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 63 A @ 250 V ac -55°C +125°C
RS Stock No. 611-0406
BrandRS PRO
$1.443
Each (In a Pack of 10)
units
4A Radial 250V ac T Nylon 8.5mm - - 8mm 4.3mm 5.08mm 40 A -40°C +85°C
RS Stock No. 767-5046
BrandRS PRO
$0.253
Each (In a Pack of 10)
units
1.6A Radial 250V T Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3546
BrandRS PRO
$0.544
Each (In a Pack of 10)
units
1.6A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 767-5153
BrandRS PRO
$0.91
Each (In a Pack of 10)
units
3.15A Radial 250V - Thermoplastic 8.35 - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 611-0686
BrandRS PRO
$1.128
Each (In a Pack of 10)
units
1A Radial 250V ac T Nylon 8.5mm - - 8mm 4.3mm 5.08mm 35 A -40°C +85°C
RS Stock No. 767-5222
BrandRS PRO
$0.838
Each (In a Pack of 10)
units
4A Radial 250V F Thermoplastic 8.35mm - - 7.7mm 4.3 mm, 22 mm 5.08mm 40 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3559
BrandRS PRO
$0.47
Each (In a Pack of 10)
units
2.5A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
Related Products
Microfuse fuses - MSF and MST series Miniature ...
Description:
Microfuse fuses - MSF and MST series Miniature fuses for soldering onto PCB or carriersFast-acting (MSF) or time-delay (MST) fuses. Low breaking capacity. Standards EN 60127, IEC 127-3//3, DIN-VDE 0820. All fuses have Thermoplaste Polyamide bodies. Miniature fuses for soldering ...
172593 series fuses Axial component fuses designed for ...
Description:
172593 series fuses Axial component fuses designed for direct mounting on PCBFast-acting 3.6 x 10 mm fuses.High breaking capacity. Approvals UL and CSA. All fuses have Thermoplaste Polyamide bodies. Axial component fuses designed for direct mounting on PCB.Fast-acting 3.6 x ...
High Performance, Series TR5 For automatic insertion, can ...
Description:
High Performance, Series TR5 For automatic insertion, can be directly soldered or plugged (use fuseholder stock no110-7900). All fuses have Thermoplaste Polyamide bodies. For automatic insertion, can be directly soldered or plugged (use fuseholder stock no.110-7900).
FRT250F and FRT250T series fuses Miniature fuses for ...
Description:
FRT250F and FRT250T series fuses Miniature fuses for soldering onto PCBBlack UL 94-V0 self-extinguishing thermoplastic enclosure.Fast-acting (FRT250F) or time-delayed (FRT250T) fuses with low breaking capacity. Standards IEC 127-4//1. All fuses have Thermoplaste Polyamide bodies. Miniature fuses for soldering onto ...