Girder Pipe & Conduit Clips

Filters

Viewing 1 - 8 of 8 products
Results per page
Description Price Pipe/Conduit Diameter Flange Thickness Maximum Load Flange Thickness Maximum Flange Thickness Minimum Pipe/Conduit Diameter Maximum Pipe/Conduit Diameter Minimum Material
RS Stock No. 291-133
BrandRS PRO
$1.067
Each (In a Pack of 50)
units
19 → 26mm - 45kg - - 26mm 19mm Steel
RS Stock No. 277-402
BrandRS PRO
$3.30
Each (In a Pack of 25)
units
19 → 26mm 14 → 20 mm 12kg 20mm 14mm 26mm 19mm Steel
RS Stock No. 277-389
BrandRS PRO
$3.141
Each (In a Pack of 25)
units
19 → 26mm 3 → 8 mm 12kg 8mm 3mm 26mm 19mm Steel
RS Stock No. 203-7385
BrandRS PRO
$11.083
Each (In a Pack of 25)
units
20 → 24mm 45 mm - - - 24mm 20mm Steel
RS Stock No. 377-293
BrandRS PRO
$3.447
Each (In a Pack of 25)
units
19 → 26mm 3 → 8 mm 45kg 8mm 3mm 26mm 19mm Steel
RS Stock No. 203-7379
BrandRS PRO
$10.229
Each (In a Pack of 25)
units
14 → 16mm 37 mm - - - 16mm 14mm Steel
RS Stock No. 290-972
BrandRS PRO
$3.928
Each (In a Pack of 25)
units
19 → 26mm 8 → 14 mm 45kg 14mm 8mm 26mm 19mm Steel
RS Stock No. 277-395
BrandRS PRO
$3.141
Each (In a Pack of 25)
units
19 → 26mm 8 → 14 mm 12kg 14mm 8mm 26mm 19mm Steel
Related Products
A latch clamp which can be configured for ...
Description:
A latch clamp which can be configured for either horizontal or vertical (corner) operation Two versions are available, one in zinc plated and passivated steel, the other in stainless steel Nominal holding force 2000N (204kgf)Handle opening angle 120°.
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...