ESD Continuous Monitors

ESD continuous monitors, or constant monitors, continuously check for electrostatic discharge (ESD) on work surfaces. This is important for preventing damage to sensitive electronic equipment or to monitor discharge in areas where there is a danger of igniting flammable liquids or gases. Other grounding components such as wrist straps, ESD safe matsand ESD grounding cordscan be attached to the monitors, connecting work surfaces and operators.

LEDs (light emitting diodes) indicate different colours to alert users if there is a discharge, sometimes accompanied by an audible alarm.

What are ESD continuous monitors used for?

ESD continuous monitors save set-up time, ensuring integrity of the entire ground loop, meaning wrist straps and other ESD accessories don’t need to be checked individually at the start of a shift.

Types of ESD continuous monitors

Some monitors not only detect static electricity, but also actively eliminate it by balancing ions. This type of continuous monitor is called an ’ioniser’, ’ionising bar’ or ’static bar’.

Monitors can be connected to one or two wrist straps and one or two work surfaces, plus grounding. Terminal types and supply voltages vary. Some products include EOS (electrical overstress) detection and/or charge detection.

Read more Read less


Viewing 1 - 4 of 4 products
Results per page
Description Price Terminal Type Supply Voltage Height Number of Operators Length Number of Worksurfaces Width Supervisor Monitoring Parking Station Charge Detection EOS Detection Complies with EN 61340-5-1
RS Stock No. 685-8760
Mfr. Part No.CT-8051-3
- 220V ac - - - - - - - - - Yes
RS Stock No. 685-8763
Mfr. Part No.99093
Phone 220V ac - 2 - 2 - Yes Yes No No Yes
RS Stock No. 700-8843
Mfr. Part No.IZD10-510
Crimp - 13mm - 87.5mm - 16.6mm - - - - -
RS Stock No. 168-5578
Mfr. Part No.19243
10 mm Jack, 10 mm Snap, Snap 24 V dc, 100 → 240V ac 23mm 1 70mm 1 53mm - - - Yes -
Related Products
Earth Bonding Point Box These EBP boxes meet ...
Earth Bonding Point Box These EBP boxes meet the need defined in EN 61340-5 for connecting the elements of an ESD Protected Area (EPA) to a common connection point or Earth Bonding Point (EBP)The normal earth contact is linked via ...
Earth Stud Kit RS PRO press studs are ...
Earth Stud Kit RS PRO press studs are a type of grounding accessory that creates earth grounding points on bench and floor mats to which to connect ground cords This earth stud kit is a simple but effective way to ...
Stud Fix Adaptor RS PRO anti-static stud fix ...
Stud Fix Adaptor RS PRO anti-static stud fix adaptor ideal for workplaces where sensitive electronic equipment must be protected from static electricityRS PRO is our own brand range and brings you a wide range of high-quality, great value products offering ...
Common Point Ground Wires RS PRO high quality ...
Common Point Ground Wires RS PRO high quality common point ground wires which are ideal for connecting floor mats, bench mats and wrist bands to earthOptions available are:129-4931 - 1 m common point ground wire287-7486 - 4.5 m common point ...