Crimping is a way of terminating strands of wire in order to connect them to external circuits, using a crimping tool to squeeze a wire hard enough to cold weld it to a given terminal. Crimp terminal kits consist of a crimping tool and various types of terminal.
The advantage of crimping is that it forms gas-tight connections, so there is less corrosion of the wire, and the joints are mechanically strong as there is no additional material used, as opposed to soldering.
How do crimp terminal kits work?
There are broadly three steps to using crimp terminal kits:
Insert the desired terminal into the crimping tool
Insert the wire into the terminal
Squeeze together the handles of the crimping tool to cold weld the terminal onto the wire
Types of crimp terminal
Crimp terminals can have different connectors, such as rings, spades, and butt splice terminals, depending on how you want to connect to the external circuit. There are also insulated and non-insulated terminals, depending on your price point and the needs of the circuit. Non-insulated terminals are cheaper but may short in certain environments, whereas insulated terminals protect against this.
Description:
Stripax plus pliers allow you to cut, strip
wires between 0.5 and 2.5 mm2 and crimp wire-end ferrules with the same cross section.Wires can be cut and stripped without clutch crimping the wire-end ferrules. Crimping complies with EN standard 50027 ...
Description:
AI-SORTI bootlace ferrule kit containing an assortment of
100 insulated colour-coded bootlace ferrules according to DIN 46228-4. The box containing the ferrules is made from anthracite coloured plastic with a transparent slide cover allowing quick access to the terminals. The ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp
terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
Description:
Plastic carry case specially designed for cable ends.The
case features 13 compartments to hold cable terminals and a special area for the automatic AT1-PA7 wire stripper.The carry case and wire stripper are sold separately.
