Connection & Termination Blocks

Termination and connection blocks, also known as terminal blocks, are a wire connector that provides a straight through connection allowing more than one circuit to connect to another circuit. Termination blocks commonly feature within light fittings to connect the mains supply to the fitting circuit.
Termination Block Types
Termination blocks are made from several different materials that provide varying levels of insulation, such as:
● Nylon
● Ceramic
● Polypropylene
● Polyamide

...
Read more Read less

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Colour Cable CSA Current Rating Height Length Maximum Operating Temperature Minimum Operating Temperature Number of Ways Termination Method Voltage Rating Width
RS Stock No. 487-9456
Mfr. Part No.ELDE.N WS 24
BrandSchmersal
$67.52
Each
units
White 0.5 → 2.5mm² 8A 60mm 46mm +80°C -25°C 3 Screw Down 250 V 10mm
RS Stock No. 487-9513
Mfr. Part No.ELDE.N RT 24
BrandSchmersal
$67.48
Each
units
Red 0.5 → 2.5mm² 8A 60mm 46mm +80°C -25°C 3 Screw Down 250 V 10mm
RS Stock No. 487-9636
Mfr. Part No.ELDE.N GN 24
BrandSchmersal
$66.97
Each
units
Green 0.5 → 2.5mm² 8A 60mm 46mm +80°C -25°C 3 Screw Down 250 V 10mm
Related Products
This RS Pro fused panel mount terminal block ...
Description:
This RS Pro fused panel mount terminal block features an integrated in-line fuse holder. The white housing is made from nylon with tinned brass inserts for a screwed termination. A pull-up latch enables an easy replacement of a fuse. Inline ...
Our tailored AAP potential distribution terminal blocks are ...
Description:
Our tailored AAP potential distribution terminal blocks are ideal for surge current protection and central control voltage distribution. Meanwhile, our new maxGUARD range enables potential distribution with integrated electronic load monitoring in the smallest of installation spaces.
The PT series is characterised by easy, direct ...
Description:
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging ...
For the space- and time-saving wiring of three-conductor ...
Description:
For the space- and time-saving wiring of three-conductor initiators and actuators with a terminal width of just 3.5 mm. Despite their small width, the terminals are easy to use thanks to push-in connection, testing facility on every terminal point, and ...