RF Splitters

An RF splitter is designed to divide or merge signals between two or more Radio Frequency ports. Typical applications include combining multiple RF device to a single receiver, such as in connecting televisions to the same aerial or satellite feed.ApplicationsRF connectors are used in wireless communication devices, and a splitter can be employed to link these devices where appropriate, such as running a digital television box and a WiFi hub to a single cable input.Though RF coaxial connections are commonly used in connecting digital television aerials, they are also employed in radio and testing applications, such as shortwave broadcasting and receiving, and EMF measuring equipment.

...
Read more Read less

Filters

Viewing 1 - 6 of 6 products
Results per page
Description Price Operating Frequency Impedance Interface Type Number of Plugs
RS Stock No. 179-2549
Mfr. Part No.R434312001
BrandRadiall
$608.26
Each
units
2 → 4.2GHz 50Ω SMA 3
RS Stock No. 179-2547
Mfr. Part No.R434512004
BrandRadiall
$862.16
Each
units
0.7 → 2.7GHz 50Ω SMA 3
RS Stock No. 179-2548
Mfr. Part No.R434212000
BrandRadiall
$601.68
Each
units
1 → 2GHz 50Ω SMA 3
RS Stock No. 179-2551
Mfr. Part No.R434712003
BrandRadiall
$977.26
Each
units
6 → 18GHz 50Ω SMA 3
RS Stock No. 179-2546
Mfr. Part No.R434512005
BrandRadiall
$711.36
Each
units
0.5 → 2GHz 50Ω SMA 3
RS Stock No. 179-2550
Mfr. Part No.R434612001
BrandRadiall
$694.72
Each
units
2 → 8GHz 50Ω SMA 3
Related Products
The Connex BNC connectors are made to a ...
Description:
The Connex BNC connectors are made to a high quality level Medium size coaxial connectors with bayonet lock. 50 ohm impedance for applications up to 4 GHz and 75 ohm impedance up to 2 GHz. 75 Ohm Series Within the ...
50 Ohm FME-SMA plug-plug between series adapter with ...
Description:
50 Ohm FME-SMA plug-plug between series adapter with PTFE dielectric and nickel plated body
General Applications • High-vibration/low-noise, antenna and test & ...
Description:
General Applications • High-vibration/low-noise, antenna and test & measurement Performance Specifications • Operating Frequency: DC to 11 GHz (50 ohms) DC to 2 GHz (75 ohms) • Nominal Impedance: 50 and 75 ohms • VSWR: 130 @ 11 GHz (50 ...
A range of BNC Jack to Jack Bulkhead ...
Description:
A range of BNC Jack to Jack Bulkhead Adaptors supplied with Hex Nut and Lockwasher These BNC Jack to Jack Bulkhead Adaptors require a cut out of Ø12.7 mm with 12.1 mm flat.